https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/270773.aspxSat, 17 Apr 2010 05:03:07 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:270773Peter0https://archivedforum.beoworld.org:443/forums/thread/270773.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=270773<p>I had the same problem with Pentas and the BV10. No solution to the displays unless you use an audio system and plug the speakers into this. </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/270764.aspxSat, 17 Apr 2010 03:10:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:270764thesunseeker0https://archivedforum.beoworld.org:443/forums/thread/270764.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=270764<p>I have jujst replaced my Avant 32 with a 10-40... My front speaker are wall monted 4500s. Although I am using the same cable I have a couple of issues...</p> <p>1 - In &quot;speaker 1&quot; when the speakers shopuld be in standby (red stanby light on), they seam to be in a semi standby mode... The red standby light is off and the display glows with no data. The amplifier does seam to be actually off as when you switch to say &quot;speaker 3&quot; you can hear it power up (switching on)...</p> <p>2 - I no longer get the source and volume details in the display (it is&nbsp;a shame if B&amp;O do not send this data out from new TV sets any more)</p> <p>Any Thoughts, advise&nbsp;or help?</p> <p>Cheers</p> <p>Gary</p> <p>&nbsp;</p><div style="clear:both;"></div>