General Forum

Re: New Manuals

beaker — Sat, 17 Apr 2010 09:42:39 GMT

Peter, I have pm'd you about a manual.

Re: New Manuals

Peter — Sat, 17 Apr 2010 07:04:18 GMT

Working my way through what we are looking for! The major things are user manuals. I have started with Beomasters!

These are the ones missing - we do have most service manuals though.

Beomaster

1100

1200

1400 (either!)

1500

1600

1700

2000 (70s)

2200

2300

3300

4401 (we have the 4400!)

If anyone has one of these and can send me a scanned copy, I will be very grateful and will put them on site. I can also scan any sent to me.

Re: New Manuals

Peter — Mon, 12 Apr 2010 10:40:43 GMT

It is my second - I think it was a very cheap one!

Re: New Manuals

Craig — Mon, 12 Apr 2010 10:15:02 GMT

Peter :

my A3 scanner is on the blink again

Have you worn it out doing all these manuals?

Craig

Re: New Manuals

tournedos — Mon, 12 Apr 2010 10:13:59 GMT

I have at least a couple which are missing from the site:

MX2000 service manual (which is quite lengthy and the folded circuit diagrams would be a horror with my sorry A4 scanner)
Beogram 6000 service manual (the later model from 1981, type 1751 - leider auf Deutsch )

If there is any interest in either of these I'll see what I can do.

Re: New Manuals

Peter — Mon, 12 Apr 2010 09:45:06 GMT

Manuals can be sent to me at mcevedy (at) mac.com . Let me know first if they are more than 10Mb as I have a slow connection!!

I do have a stash of old TV service manuals (thanks Graham) but my A3 scanner is on the blink again and they are huge! If a lot of interest is shown in these or old VCR manuals, I may be persuaded to do some. If only one person wants them, I tend to lend them out - sometimes the nice member returns them scanned which is always very much appreciated!!

Re: New Manuals

burantek — Mon, 12 Apr 2010 07:58:11 GMT

You guys are making me look lazy!

I think we should watermark (BeoWorld) whatever we can provide.

Re: New Manuals

Craig — Mon, 12 Apr 2010 05:14:00 GMT

Just checked through my pile. Found the following which don't seem to be on the site.

Beogram 1000

Beovision 5502 -7702 - 8802

MCL82 Installation and ref manuals.

Also have a Beolink guide called "How to set uo the Beolink system"

If you need any of these scanning Peter, please let me know. Should be able to do them at the weekend. Ill do them in PDF format and send them to you.

Craig

Re: New Manuals

Stonk — Mon, 12 Apr 2010 03:56:53 GMT

Having checked what's already on site I've scanned in a missing user manual (MCL Xtra Speaker Installation & setup guide) and have yet to do a BG CD4500 service manual for Beoworld. No doubt I have some more that the site's missing but where do I send the scanned pdf's to? Forgive me if it's been mentioned many times.

Also I note that we don't have the BS3500 user manual but do have the individual units user manuals. I do have the BS3500 user manual - is it worth doing?

Steve

Re: New Manuals

Craig — Sat, 10 Apr 2010 17:58:37 GMT

Peter :

New equipment is not an issue - it is the 60s,70s and early 80s that are tricky. I have most service manuals but user manuals are thin on the ground. I'd ask B&O but they appear to have chucked out most of this era!

From what I saw they were all from this sort of era.

Craig

Re: New Manuals

Peter — Sat, 10 Apr 2010 17:19:25 GMT

New equipment is not an issue - it is the 60s,70s and early 80s that are tricky. I have most service manuals but user manuals are thin on the ground. I'd ask B&O but they appear to have chucked out most of this era!

Re: New Manuals

Craig — Sat, 10 Apr 2010 17:11:17 GMT

burantek:

Peter: I had asked in some old thread if there was any sort of master list of manuals... I have tons and could have them scanned and provided in *.pdf format. I would just hate to "double up" if I could... and provide gap filling material.

Same here Peter, been cleaning out the garage today (2 skips). Found a pile of manuals I had forgotten about. Ill try to work through what I have in the next few days.

Craig

Re: New Manuals

Peter — Sat, 10 Apr 2010 12:46:42 GMT

That would be great! I'll see if I can rustle up a list of wanted ones!

Re: New Manuals

burantek — Sat, 10 Apr 2010 12:35:26 GMT

Stonk:
I bet that scanner's starting to make funny noises after the BV10

N'ah... Just some hyperbole-laced clouding issues.

Peter: I had asked in some old thread if there was any sort of master list of manuals... I have tons and could have them scanned and provided in *.pdf format. I would just hate to "double up" if I could... and provide gap filling material.

Re: New Manuals

Stonk — Sat, 10 Apr 2010 11:53:02 GMT

Well done Peter. I bet that scanner's starting to make funny noises after the BV10