General Forum

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Mon, 12 Apr 2010 02:25:31 GMT

I had it adjusted to MX, but again no success. Avant or MX; it makes no difference at all .

Is it possible to load different software to the BEO4? It seems that if I would have EE 3.2 and SW 3.0 it should work.

Regards Bart.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Peter — Sun, 11 Apr 2010 12:47:45 GMT

Sounds clever - just tried it on mine and it removed almost all my options so I put it back to avant! Will be interested to hear if it works though!

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

kallasr — Sun, 11 Apr 2010 12:33:36 GMT

Last chance: set the config of the Beo4 4 to MX.

This can be done like adding commands: standby+list - then config? mx.

Ralf

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Sun, 11 Apr 2010 12:27:33 GMT

...I just exchanged my Beolink 1000 with somebody's BEO4 because my MX6000 was supposed to work with a BEO4.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

kallasr — Sun, 11 Apr 2010 06:12:12 GMT

Churchyardd:

Then I get the following options:

TUNE; PICTURE; STORE; CLEAR; BASS; TREBLE; LOUDNSS; S. STORE.

Strange... I got

TUNE; PICTURE; SOUND(!!!); STORE; CLEAR; BASS; TREBLE; LOUDNSS; S. STORE.

Churchyardd:

If I press either BASS; TREBLE OR LOUDNESS, nothing happens; no response on the TV screen.

Same here.

No ideas left.... Maybe you got a Beolink 1000 somewhere??

Ralf

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Sat, 10 Apr 2010 16:16:49 GMT

Then I get the following options:

TUNE; PICTURE; STORE; CLEAR; BASS; TREBLE; LOUDNSS; S. STORE.

If I press either BASS; TREBLE OR LOUDNESS, nothing happens; no response on the TV screen.

The adjustments for Picture (STAND, BRILLIANCE; COLOUR; CONTRAST), however, do give me the responses on top left of the screen I would have expected.

Bart.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

kallasr — Sat, 10 Apr 2010 13:50:36 GMT

But when you press LIST until V.SETUP then GO then LIST again, what are the options appearing?

Ralf

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Sat, 10 Apr 2010 13:26:37 GMT

Thanks a lot Ralf, I really appreciate it, but unfortunately no succes.

I have no SOUND 'under' V.SETUP. Only 'next' to V.Setup; I mean when I press LIST I can choose between "Stand, Sound, V.Setup" (I programmed it like this).

And I can press as many times SOUND as I want, but I only get TV 1 Mono, TV 1 Stereo, TV 1 Mono, TV 1 Stereo, TV 1 Mono and so on.

Regards, Bart.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

kallasr — Sat, 10 Apr 2010 10:24:14 GMT

Same reaction on my tv...BUT solution is as follows:

LIST until V.SETUP, then GO

LIST until SOUND, then GO SEVERAL TIMES!! First GO shows VOLUME, second BALANCE etc. !!!

LIST until S.STORE or STORE, then GO.

Hope this is it!

Ralf

PS: EE/SW 3.2/3.0 on my Beo 4.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Sat, 10 Apr 2010 10:05:34 GMT

That's exactly the problem; when I press GO when BASS is displayed on the BEO4, I get no response on the TV screen. If I press up and down, the channel switches.

Regards, Bart.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Peter — Sat, 10 Apr 2010 03:28:02 GMT

I am sure your MX reacts like my LX. When you go into V.Setup and then press LIST to scroll through the options, if you press GO when for instance BASS is listed, do you get BASS displayed at the top left of the screen? Which up and down buttons are you using? It should be the top and bottom of the diamond, not the volume control.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Sat, 10 Apr 2010 03:13:29 GMT

SOUND gives me only the option between Mono and Stereo.

MENU+GO results in EE 4.2 and SW 4.4.

It's quite a riddle...

Regards Bart

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

tournedos — Fri, 09 Apr 2010 03:09:38 GMT

I flipped through a number of user manuals on site, and comparing the manuals of LX6000 (BL1000 version) and MX6000 (Beo4 version) seems that those menu options would be missing from the BL1000 versions of the TV sets. On those, sound settings are called up with SOUND, and picture commands of course with PICTURE.

Whether those are on the main LIST level of the Beo4 or under V.SETUP is probably a version issue on the Beo4 - mine are the latter way. Have you tried simply listing to SOUND and then pressing GO multiple times, which apparently should cycle through the settings? (sorry if you've said that already ) I already verified that SOUND+GO definitely sends the same code as SOUND on BL1000.

Beo4 version can be checked by pressing MENU+GO together, then listing through the items. The one I have at hand is EE 3.2 and SW 3.0.

BTW I would never trust anything that previous owners say

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

Churchyardd — Fri, 09 Apr 2010 02:43:00 GMT

My set is a MX6000-Beo4, type 7863 ETS with SW2.0. With this software the SOUND and PICTURE options are indeed missing on the main menu.

Re: MX6000 with Beo4; Cannot adjust BASS, TREBLE and LOUDNESS

tournedos — Fri, 09 Apr 2010 02:36:27 GMT

I have a MX6000-Beo4-IT with software 3.1, and the sound (and picture) selections are on the main menu level between program list and setup. Works perfectly fine with either Beo4 or Beolink 1000.

Must be some version 2.x related trick...