General Forum

Re: Powerlink Mk1 & Mk3 what's the difference?

tompa — Tue, 20 Apr 2010 16:57:35 GMT

The MK 3 version does NOT have extra shielding but a separat digital earth wire (blue) for the icepower speakers

But MK3 over 10 meters and all (MK2 fully mounted) have been replaced with a new one (MK4?)with extra shielding and a diameter of aprox 5,5 mm

Re: Powerlink Mk1 & Mk3 what's the difference?

Steve at Sounds Heavenly — Sun, 11 Apr 2010 14:00:23 GMT

Thanks Lee!

To summarise the different cable versions:-

Powerlink mk.1 is only suitable for the simpler Beolab speakers (ie. those without displays or digital amps. They are very thin and I personally won't sell them as I'm not too happy with the sound quality on longer cable runs.

Mk.2 cables (aka. "fully-wired") have all 8 pins connected and will work with any Powerlink-equipped speakers, including Beolab 5 and all models with displays. As Lee has said, these are the best bet if you think you may change your speakers in future, as you know you won't need to replace the cables. I use them all around the house, as they work well with any speakers.

Mk.3 cables have extra shielding (as mentioned by joeyboygolf) to ground the digital amps in newer speakers, but they lack the data wiring for Beolab 5 or speakers with displays.

Kind regards,

Steve.

Re: Powerlink Mk1 & Mk3 what's the difference?

9 LEE — Wed, 17 Mar 2010 18:46:01 GMT

The SoundsHeavenly cables are superb. Get Mk2, then no matter what speaker you change to in the future, you'll never need to change your cables.

Lee

Re: Powerlink Mk1 & Mk3 what's the difference?

Wed, 17 Mar 2010 17:01:50 GMT

Sorry, how rude of me. Of course I'll be shopping at Sounds Heavenly (Never noticed the ad before) not eBay.

Re: Powerlink Mk1 & Mk3 what's the difference?

joeyboygolf — Fri, 12 Mar 2010 16:13:55 GMT

The Mk 3 were developed with more shielding to prevent hum which was occuring on speakers with ICEpower amplifiers. So models such as BL 3 and BL1 were supplied with Mk3 powerlinks.

With BL8000 you can use Mk1 or 3 as the fancy takes you. There will be no difference.

Powerlink Mk1 & Mk3 what's the difference?

Fri, 12 Mar 2010 16:02:20 GMT

I need new cables. Mk3 seem a plenty on eBay. My BL8000's had Mk1's I think, but would it hurt using Mk3's?

Whats the difference?