https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/262556.aspxWed, 03 Mar 2010 05:55:11 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262556andy0https://archivedforum.beoworld.org:443/forums/thread/262556.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262556<p>tony..you have a pm.. !</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/262365.aspxMon, 01 Mar 2010 11:51:08 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262365stotty11110https://archivedforum.beoworld.org:443/forums/thread/262365.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262365<p>andy you have a pm!</p> <p>t</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/262326.aspxMon, 01 Mar 2010 07:37:17 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262326andy0https://archivedforum.beoworld.org:443/forums/thread/262326.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262326<p>tony......thats not a bad idea.....if your sure ?</p> <p>andy</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/262117.aspxSun, 28 Feb 2010 13:31:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262117stotty11110https://archivedforum.beoworld.org:443/forums/thread/262117.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262117<p>hi andy</p> <p>have a go yerself - very satisfying - if not I&#39;ll be passing in about4 weeks on way to worcestershire could pick em up and do em for you!</p> <p>bc2 great well pleased</p> <p>salut</p> <p>tony</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/262074.aspxSun, 28 Feb 2010 05:29:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262074joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/262074.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262074<p>Talk to Brett when he calls next Sunday.</p> <p>Against my advice, &nbsp;he has just refoamed a pair of Penta II and will be able to give you all the information!</p> <p>Personally, I have bought replacement drivers in the past and they are still available at around &pound;25-&pound;30 each.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/262072.aspxSun, 28 Feb 2010 04:52:44 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262072Magnus0https://archivedforum.beoworld.org:443/forums/thread/262072.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262072<p>I had the same problem with my pentas and I refoamed them. The cost was less then 10% of what new drivers from B&amp;O would cost. </p> <p>I bought the new foam rings from Good Hifi in Netherlands. They also have rubber rings but I went for original material (foam). http://www.goodhifi.com/&nbsp; and then go to the webshop.</p> <p>It was quite easy to refoam the drivers, the trick is to find something to press down the ring to the cone and the frame while the glue is hardening. After some research in the kitchen area I found two mugs in different sizes. There is a refoam manual at Good Hifi&#39;s website.</p> <p>/Magnus</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/262067.aspxSun, 28 Feb 2010 04:11:51 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:262067andy0https://archivedforum.beoworld.org:443/forums/thread/262067.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=262067<p>Good Morning to all</p> <p>i have just bought some PentaLab 2 and of course foam rot has set in.....</p> <p>so, questions and/or advice...</p> <p>should i....</p> <p>replace drivers....</p> <p>refoam..........( best suppiler)</p> <p>replace/refoam only what needs doing.....</p> <p>do them myself ........( ham fisted and no patience...lol)</p> <p>do refoamed perform as well.....</p> <p>will replacement drivers last.....</p> <p>i have looked through various threads on refoaming, and while it looks a pain i am sure i can do it....but replacing the drivers looks easier but more expensive ( i am guessing the drivers are still available)</p> <p>regards</p> <p>&nbsp;</p> <p>andy</p> <p>&nbsp;</p><div style="clear:both;"></div>