General Forum

Re: Mark1 Beo4

saf — Sun, 07 Feb 2010 01:05:33 GMT

The Plumber:
Hello, How do i activate the aux output from my BS9000 in the bathroom (speakers connected to passive amp with eye) from a mk1 beo4?

Why, when accessing your main room sources from your bathroom, you would want to use LINK command preceeding the source you want to use, in this case A.AUX? I take it you don't have other remote controllable B&O in/around you bathroom (linked or not) - here I could be wrong, of course. However, if you don't, then simply selecting the source by chosing A.AUX and GO on your Beo4 should work. (Your BeoLink passive should be in L.OPTION 6, of course).

Re: Mark1 Beo4

petermc — Sat, 06 Feb 2010 17:31:02 GMT

Does the main A-tape button up the top work?

My Beo4's may not be mark I though but they all activate the aux through the link rooms

Peter

Re: Mark1 Beo4

The Plumber — Sat, 06 Feb 2010 16:09:33 GMT

Cheers Soren. I need to select LINK then PHONO and that works. Unfortunately there is no L-PHONO to add. Thanks.

Re: Mark1 Beo4

Soren — Sat, 06 Feb 2010 15:41:30 GMT

If L-N.RA works on MK2, try L-PHONO on MK1

Søren

Re: Mark1 Beo4

The Plumber — Sat, 06 Feb 2010 14:26:01 GMT

Where's The Stig when you need him?

Mark1 Beo4

The Plumber — Sat, 06 Feb 2010 07:55:00 GMT

Hello, How do i activate the aux output from my BS9000 in the bathroom (speakers connected to passive amp with eye) from a mk1 beo4? In the kitchen with Mk2 Beo4 and MX4002 i use L-N.RA. But i cant find this option to add on the Mk1 beo4. I can use both my Mk2 and Mk3 beo4 to activate aux in bathroom but ive just refurbed' a Mk1 and would prefer to use this. Cheers.