https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/257492.aspxFri, 05 Feb 2010 08:31:28 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:257492Razlaw0https://archivedforum.beoworld.org:443/forums/thread/257492.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=257492<p>As I am in the USA I have no experience with sky. However, I had problems with the Apple PUC in that whenever I would use another source it would at times send a signal to the Apple TV. It was basically impossible to leave Apple TV in standby as operating other sources (turning them off if I remember correctly) would turn the Apple TV back on.&nbsp;</p> <p>I solved the problem by using the puc for a Samsung t-351 and then using the remote learning function of the Apple TV. It works just as the Apple PUC other than I used Green for what would be Exit in the Apple puc. I had difficulty getting the Apple TV to learn the Exit command. Recently I noticed that there are 9 other commands available on Apple TV for learning remotes, such as skip forward etc. I again used the learning function and was able to get the numbers 1-9 on the Beo 4 to control these. Dealer is in the process of programming a Beo 5 for me. He is going to try to put a screen on the Beo 5 with the 9 additional Apple TV commands labeled by function with the Beo 5 sending the signal for numbers 1-9 so I do not need to remember which number does which function.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/257486.aspxFri, 05 Feb 2010 07:13:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:257486Seanie_2300https://archivedforum.beoworld.org:443/forums/thread/257486.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=257486<p>Hello all</p> <p>has anyone else noticed that if you have a sky hd box and apple tv connected to the BV7 and use the PUC that when you use sky it seems to send commands to the apple tv also.</p> <p>this was mentioned by someone before but i had not experanced it.</p> <p>what would cause this and are B&amp;o aware?</p><div style="clear:both;"></div>