General Forum

Re: BEO 6000 active speakers with non B & O kit

BarryNI — Wed, 03 Feb 2010 06:46:31 GMT

Many thanks from both contributors, for solving the problem.

Re: BEO 6000 active speakers with non B & O kit

tournedos — Tue, 02 Feb 2010 17:40:54 GMT

They can be operated straight from a line level output (with controlled volume). Just connect your signal to the RCA input and turn the input switch to "LINE". The speakers will turn on automatically when they receive a signal, and turn off automatically after it has been gone for a few minutes.

Re: BEO 6000 active speakers with non B & O kit

beoblok — Tue, 02 Feb 2010 17:35:39 GMT

I think they can be fed from your amplifier via B&O attenuators, so your BL6000's are then activated by the audio input...

Maybe check the "workbench" part of the forum.

Hope this helps

BEO 6000 active speakers with non B & O kit

BarryNI — Tue, 02 Feb 2010 11:04:16 GMT

I wish to use my BEO 6000 speakers with a standard pre amp. Whilst the connection is not a problem beolink to RCA, where do I get the trigger to bring the speakers out of standby?