https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/255994.aspxSat, 30 Jan 2010 09:09:52 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:255994Seanie_2300https://archivedforum.beoworld.org:443/forums/thread/255994.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=255994<p>why dont you use the circuit tester to test for connectivity on each pin to see if that is where the problem lies</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/255990.aspxSat, 30 Jan 2010 08:24:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:255990hagan0https://archivedforum.beoworld.org:443/forums/thread/255990.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=255990<p>Yes I am.</p> <p>&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/255989.aspxSat, 30 Jan 2010 08:13:35 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:255989Seanie_2300https://archivedforum.beoworld.org:443/forums/thread/255989.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=255989<p>are you able to use a multimeter?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/255957.aspxSat, 30 Jan 2010 03:50:46 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:255957hagan0https://archivedforum.beoworld.org:443/forums/thread/255957.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=255957<p>Hi!</p> <p>I&acute;m having a problem vith a new ML cable which I connected directly into a wall socket (inside). The socket obviously works because a Beovision is connected with ML cable with two connectors. I thought the easiest way to connect another device was to just open the wall socket and connect a Ml cable directly into the terminals instead of using a junction box on the cable to the beovision.</p> <p>problem is I get no ML signal in the new cable. How can I check for faults. The New cable has a ml connector at the end&nbsp;</p><div style="clear:both;"></div>