General Forum

Re: Beogram 5005 SKATING PROBLEM

Dillen — Sat, 30 Jan 2010 12:16:44 GMT

Incorrect tracking force ?

Martin

Re: Beogram 5005 SKATING PROBLEM

joeyboygolf — Sat, 30 Jan 2010 11:44:16 GMT

There is an adjustment for the diaphragm which is described on page 5-3 in the service manual.

Problems with the bulb or photo resistor have normally manifested themselves as a lack of movement rather than continuous movement in my experience but I suppose it is conceivable for the resistor to go closed circuit??

I have never known one to go out of adjustment so I think a member such as Dillen will need to take a look at it as I think you may have a technical fault.

Re: Beogram 5005 SKATING PROBLEM

bruno_destickere — Sat, 30 Jan 2010 10:45:08 GMT

Hello Peter,

How can I fix this? Is something damaged or is it just adjusting?

Where can I find it in the service manual?

Thanks for help !!

Re: Beogram 5005 SKATING PROBLEM

Peter — Sat, 30 Jan 2010 07:25:28 GMT

There is a fault in the arm movement detector.

Re: Beogram 5005 SKATING PROBLEM

bruno_destickere — Sat, 30 Jan 2010 05:19:29 GMT

Hello, thanks for answering!

It's a brand new stylus SMMC 4 from Soundsmith.

So, that's certainly not the problem!

Any other suggestions?

Regards, Bruno Destickere

Re: Beogram 5005 SKATING PROBLEM

joeyboygolf — Sat, 30 Jan 2010 05:02:32 GMT

From experience, I would immiediately suspect the stylus!

Beogram 5005 SKATING PROBLEM

bruno_destickere — Sat, 30 Jan 2010 03:24:27 GMT

I have recently purchased a beogram 5005. All the controls of the turntable seem to function well, except from the tonearm. As soon as it lowers on the record, it starts to skate all the way towards the end of the record, and then returns to its initial position. I know this is also associated with the servo motor, which seems to work continuously.

How can I fix this problem? Any suggestions?

Regards, Bruno Destickere