General Forum

Re: MX7000 Masterlink to BV9

Nickyg63 — Tue, 12 Jan 2010 15:44:10 GMT

hi your mx7000 is a fantastic set! It doesn't have masterlink you need a beolink video module(which i have one available) and this connect to powerlink socket you will also need to feed a coax from the video out to the aerial of the mx7000 hope that helps

Cheers Nick

P.s. e mail me if your require the beolink video

Re: MX7000 Masterlink to BV9

elephant — Tue, 12 Jan 2010 13:52:52 GMT

It is unclear to me from the BeoWorld product section, BeoCentral, and BeoTech sites whether the MX7000 has Masterlink as standard or as an option (if at all).

However be aware that:

-- the Masterlink technology is used to transmit the control signals and carry the audio content, and

-- a separate cable is needed to carry the video content - I believe the BV9 will "broadcast" a radio frequency video signal for any link set(s) to receive

The link set(s) receive their audio via their master link connection, and exchange control signals via that connection.

Hope that helps a little.

MX7000 Masterlink to BV9

ScottH — Tue, 12 Jan 2010 12:06:30 GMT

Hello,

This is my first post, I have been a 'lurker' for many months, and this site is an invaluable resource.

I have searched through all of the previous posts and read many articles, but none of them seem to have an answer to my question.

I have a MX7000, which I would like to link with my Beovision 9. The Beovision 9 has a SkyHD, PS3 and AppleTV all connected. I am only interested in being able to watch the content from the SKYHD box. I would like to know what I need to be able to connect the two devices so that I can watch the SkyHD source on the MX7000.

I have structured cabling (Cat5e) which runs to all rooms in my house and I have also been reading how to distribute the Masterlink throughout the house. I have, again, read many posts in relation to connecting Masterlink equipment and I am still undecided on which way to go. I am probably going to purchase the 'pre-made' cables sold through B&O (even though there are deficiencies because I don't have Cat6/7).

Any assistance would be greatly appreciated.

Scott