https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/239749.aspxWed, 18 Nov 2009 08:42:22 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:239749dotele0https://archivedforum.beoworld.org:443/forums/thread/239749.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=239749<p>Could it be that the platter is not level?&nbsp; I ask this because the platter appears to sit higher on the tonearm side compared to the side opposite the tonearm.&nbsp; I did not notice instructions for leveling the platter in the service guide.&nbsp; Thank you</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/239748.aspxWed, 18 Nov 2009 08:36:15 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:239748joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/239748.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=239748<p>The 5005 is tangential so there is no bias to be adjusted.</p> <p>Suspect either stylus or running rails that the moving carriage slides on are not fully down in their holders and not quite running level.</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/239740.aspxWed, 18 Nov 2009 07:39:25 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:239740Kokomo0https://archivedforum.beoworld.org:443/forums/thread/239740.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=239740<p>Years since I played records, but back in the far distant days when I was well into turntable &amp; arm setups, bias &amp; compensation settings were crucial for the stylus to negotiate the groove, particularly nearer the centre where the forces on the stylus change considerably. I&#39;m not familiar with the 5005, but does it have bias/compensation adjustment?&nbsp; </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/239738.aspxWed, 18 Nov 2009 07:33:58 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:239738dotele0https://archivedforum.beoworld.org:443/forums/thread/239738.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=239738<p><span class="postbody">The Beogram 5005 turntable that I have plays great until it gets to the last few tracks of the record and then it distorts the recording.&nbsp; I have cleaned the rails and lubed and checked tonearm set up, I have also used a new record to test.&nbsp; I have been told that it might be the stylus but I would like a second opinion before I spend the money on a new stylus. Any thoughts on what might be causing this?&nbsp; Thank you<br /></span></p><div style="clear:both;"></div>