General Forum

Re: Connecting BeoSystem 3 to Samsung tv ?

Weebyx — Wed, 07 Oct 2009 04:40:49 GMT

That did it :)

Thanks alot

/Weebyx

Connecting BeoSystem 3 to Samsung LED TV?

mor — Sun, 04 Oct 2009 18:18:45 GMT

Apologies to hijack your conversation - but I was wondering whether anyone succeeded connecting a Beosystem 3 to a Samsung LED TV, yet?

I do like the Samsung's dimension positvely better than the B&O 4's or the Panasonic's.

Maybe someone reading this can share his or her experience(s)

Re: Connecting BeoSystem 3 to Samsung tv ?

batfab — Sun, 04 Oct 2009 17:15:46 GMT

I used to have similar problem with non-Beo TV and it took me some time to sort it out ;-)

cure was following setting in the customer service menu of the BS3 (in <Picture Adjustment>):

Display1

OUTP 60HZ => ON (default after system reset is Off - in this state no TV-Picture was displayed / only in tuning-menu)

FRAMELOCK => Double Buffer (default is "abort line" -> in this state no AV/HDMI was displayed...)

Only by modifying these settings I could get the whole thing work on my 46" Sony Bravia...

Connecting BeoSystem 3 to Samsung tv ?

Weebyx — Sun, 04 Oct 2009 03:02:53 GMT

I am in the process of moving, and in then 2 months my BV4-50" is stored at my dealers location, until the new place is being finished.

In the meantime i thought it would be cool to connect the BS3 to my girlfriends samsung tv, just to be able to use the PUC controller and my Beo5 :)

I have connected the BS3 to an available HDMI port on the samsung tv using an adaptercable DVI->HDMI. When i switch the Samsung to HDMI3(the connected port) i can see the tv from BS3, i have also connected a Denon DVD player to AV1 with scart cable, and a Playstation 3 to AV2 with HDMI. I have configured the sources in the BS3 correctly, but when i switch the source on BS3 to DVD or V.MEM(the Playstation) the Samsung tv just says "mode not supported" and not picture is shown.

In the configuration on the BS3, i have selected "non B&O screen" as Display 1, and i have set the resolution to the Samsung resolution.

Maybe it is the HDCP that is acting up, and i could understand it with the PS3, but the DVD player is connected via SCART, so that should work.

I have read in the manual to the samsung tv, that when using a HDMI/DVI cable connection, the HDMI2 input should be used, but i am using the DVI/HDMI connection. Has anyone tried connecting a BS3 to an ordinary HDMI port on another tv ?

/Weebyx