General Forum

Re: Beovision Avant - Using scart sockets

Large48 — Tue, 22 Sep 2009 14:36:51 GMT

Hey, I tried. ;-)

Re: Beovision Avant - Using scart sockets

Peter — Tue, 22 Sep 2009 13:18:29 GMT

For modern equipment, you can find some manuals on the official site. Not as many as we have though and not the service manuals either!

Re: Beovision Avant - Using scart sockets

Large48 — Tue, 22 Sep 2009 11:49:53 GMT

Become a Silver or Gold member and then all the manuals are available for download.

Re: Beovision Avant - Using scart sockets

JP999 — Tue, 22 Sep 2009 01:50:13 GMT

Hi Stefan,

Thanks for the reply. How do i assign the sources and how do i find the hidden buttons? Unfortunately i do not have a manual.

I have tried scrolling through the list but it only comes up with Camcorder as you suggested in your second answer.

James

Re: Beovision Avant - Using scart sockets

stefan — Mon, 14 Sep 2009 06:02:06 GMT

Hi and welcome to Beoworld.

"My questions are, like on other TVs, is there a button that can toggle through the different inputs on the TV?"

No, not necessary. If you have assigned your sources for example V.AUX for Wii, DVD for the Playstation and CAMCORDER for the stb you just press DVD or V.AUX and the Avant will be powered up, turns to the desired position and switches to the chosen AV port. I assume you are using a Beo4.

V.AUX and CAMCORDER are hidden buttos in the LIST. If you do not find them, just add them. The manual describes how to do that.

"Also, how do i access the 'camcorder setting' so i can watch the satellite without having to turn the TV off and on again?"

Should work as said above, just press LIST until CAMCORDER and then press GO.

Hope this helps.

Stefan

Beovision Avant - Using scart sockets

JP999 — Mon, 14 Sep 2009 05:41:16 GMT

Dear all,

I have a Beovision Avant 28 and want to connect three external units to it (Satellite receiver/Playstation and Wii). I have connected the Wii and the Playstation using the scart sockets at the rear and the satellite through the connectors for the camcorder.

When i turn on the TV it automatically picks up that i have connected something in the camcorder sockets so the satellite comes on. I can access one of the scart sockets using the DVD button on the remote but there does not seem to be a way to access the other scart socket without going into the menu and using the setup options to change which scart socket is for the DVD. I hope you're still with me!

My questions are, like on other TVs, is there a button that can toggle through the different inputs on the TV?

Also, how do i access the 'camcorder setting' so i can watch the satellite without having to turn the TV off and on again?

Thanks for your help,

James