General Forum

Re: BV7 Panasonic DMP-BD55 PUC Help

Seanie_230 — Sun, 20 Sep 2009 09:15:58 GMT

I have been using the BD60 for a while now with the PUC called BD55 but B&O have now removed these from teh PUC table and the most recent it G Panasonic.

This works just as well apart from the display is missing so you can see how far the film you have left.

also

Does anyone else notice that this player does not seem to remember last position viewed within a film?

Re: BV7 Panasonic DMP-BD55 PUC Help

Seanie_230 — Mon, 07 Sep 2009 12:15:22 GMT

Hi again

if i press dvd then go twice the player comes on and go 0 turns it off but i thought it was supopsed to be automatic.

it does work if i select off at source change but not at TV standby shame.

Re: BV7 Panasonic DMP-BD55 PUC Help

Carolpa — Mon, 07 Sep 2009 12:09:50 GMT

Hi Seanie,

I use the BD55 PUC for my BD35 player. All works fine.

The way how the DVD shuts down is selectable at the CONNECTION part of the OPTION menu.

if you have the BD60 connected to the AV1, select AV1 and follow the menu.

After you have Chosen these connection settings, you better first use the BD60 remote once/twice for switching on. This has somthing to do with the setting of the PUC program. Hereafter the BD60 should work properly.

BV7 Panasonic DMP-BD55 PUC Help

Seanie_230 — Mon, 07 Sep 2009 04:45:04 GMT

Hello

All

I have the Panasonic BD60 workign with the PUC for the BD55 and it works nicely.

A few things i have noticed.

The player does not turn on when you press DVD, it will turn off if you select off at source change.

When the TV goes to standby using the timer it also does not turn off the player, when you have off at source change selected.

Am i missing something?

Is there a dedicated PUC for the BD60?

edit: After speaking to my dealer today it appears that the Panasonic Pucs have been replaced with one generic PUC in the PUC generator program.