General Forum

Re: Beovision 7 linking to MX4000 and Sky+

dglasbrook — Wed, 12 Aug 2009 16:49:09 GMT

Hi Nicky,
No problem - how much are you after for it?
David

Re: Beovision 7 linking to MX4000 and Sky+

Nickyg63 — Wed, 12 Aug 2009 15:01:02 GMT

Hi sorry to hi jack the thread but I have a beolink video that I can sell you! Cheers Nick

Re: Beovision 7 linking to MX4000 and Sky+

dglasbrook — Tue, 11 Aug 2009 14:54:08 GMT

Thanks very much Stefan - I appreciate the advice

Re: Beovision 7 linking to MX4000 and Sky+

stefan — Tue, 11 Aug 2009 14:32:51 GMT

David,

I got my first Beocenter, a BC 9500, 20 years ago. Today I have 9 audiosystems (6 active), 5 Beovisions and a lot of links...

The Beolink Video is 1615. Maybe you can find one second live. They are cheap, because MX Beovisions are not often used anymore....

Sorry, actually it`s called RF link amplifier. Part-No. is 4052/4053, about 100 Euro. The amplifier improves picture quality on your link TVs. Connect it in the coax between BV7 (master) and your link TV (MX4000).

Hope this helps.

Stefan

Re: Beovision 7 linking to MX4000 and Sky+

dglasbrook — Tue, 11 Aug 2009 11:37:38 GMT

Hi Stefan,

Thanks for the quick response, and the welcome (I can't believe that I've only just found this forum - I've been expanding my B&O collection for 18 years!). I have the masterlink cable and connectors, and the coax cable (yet to venture under the floor, but it looks accessible).

Is there a particular model of Beolink Video Converter that I need (I can see there are several types - 1611, 1614, 1615)?

What is the RL Link Amplifier?

Thanks,
David

Re: Beovision 7 linking to MX4000 and Sky+

stefan — Tue, 11 Aug 2009 07:24:58 GMT

Hi,

you will need a Beolink Video Converter, a masterlink-cable and an coax cable to your MX room. Connect the masterlink to the ML socket of the BL Video, a 7pin DIN cable to the BL Video and the other end to AUDIO AUX LINK socket on the MX 4000. Connect the antenna cable to the MX - you will need the RL Link amplifier for the BV7. In this setup you can access all audio- and video devices (except PC) in the main room. It is also possible to watch a video source in the MX room and listen to an audio source in another linkroom.

Welcome to Beoworld.

Stefan

Beovision 7 linking to MX4000 and Sky+

dglasbrook — Tue, 11 Aug 2009 07:03:32 GMT

Hi all,
I have just moved house, and trying to setup my multi-room B&O system again I have a few questions that I would be grateful for any advice on:

I have a Beovision 7 (with 8000 & 6000 speakers) and a Beosound 9000 - I can set these up OK in the same room. I've also inherited an old MX4000 (without built-in beolink) - how do I connect the MX4000 to the system to watch TV and listen to music in a different room?

I can't get Freeview in the new house (I had a freeview STB before), and so I'm thinking of a Sky+ box on the back of the Beovision 7 controlled by the Beo4 via PUC - does that work OK, and should I be able to control it from the MX4000 if I get it linked?
Thanks
David