General Forum

Re: av9000 and beolink active question

fish — Thu, 09 Jul 2009 05:54:09 GMT

sorry, what i meant to say was, i have an av9000 which i can't run as a slave off the master avant!

steve

Re: av9000 and beolink active question

Peter — Mon, 06 Jul 2009 11:32:12 GMT

My AV9000 also has a Sky box attached - however I am aware that the STB-C module is no longer easily available. I didn't think the AV9000 could be used as a slave though! Which model is it?

Re: av9000 and beolink active question

fish — Mon, 06 Jul 2009 11:28:02 GMT

thanks stefan/guy.

will look at getting a beolink 1000 and giving that a try first.

cheers

steve

Re: av9000 and beolink active question

Large48 — Mon, 06 Jul 2009 08:29:36 GMT

er, I use my Sky + directly off of my AV9000.............

What's stopping you do that?

Cheers

GUY

Re: av9000 and beolink active question

stefan — Mon, 06 Jul 2009 08:18:19 GMT

You can use a Beolink 1000. This remote is able to change AV9000 volume even it is in LINK SAT mode, and it has a specific button for "LINK".

You can also use a Lintronic box. This box could send "TV - 6" IR macro command, when receiving -for example- LINK - SAT. So you could activate your AV9000 AND Avant by pressing just LINK - SAT.

Hope that helps.

Stefan

av9000 and beolink active question

fish — Mon, 06 Jul 2009 07:07:30 GMT

hi,

hopefully someone can help.

i have connected a beolink active (with eye) to my av9000 (which is running as a slave off the master avant) so that i can control my sky+ box on the avant (can't be done directly with the av9000), but to get it to work i have to put the tv onto say channel 6, then on the beolink controller i need to find 'link' & go > then 'sat' which then allows me to change channels, however if i then want to say turn the volume down i have to go back to 'tv' and then go back through the process above after - is there a way that i can program a l-sat option or something so that the process can be simpified?

thanks in advance

steve