General Forum

Re: Beolab 6000 distorted bass

Dave — Fri, 03 Jul 2009 18:57:17 GMT

koning:

That's why non b&O people say....you pay for it design

Maybe they are right

I think is certainly is the case with these speakers. Yes they are not bad speakers, but... not if you're choosing between them and 4000's. So B&O did make these speakers to a price, but seriously, how much do good drivers cost to use when they are building it from freaking anodised aluminium???

Re: Beolab 6000 distorted bass

koning — Fri, 03 Jul 2009 09:18:28 GMT

That's why non b&O people say....you pay for it design

Maybe they are right

Re: Beolab 6000 distorted bass

ChrDH — Fri, 03 Jul 2009 05:01:10 GMT

What about the driver units in the Beolab 3500, does they have the same problem?

Chr

Re: Beolab 6000 distorted bass

PhilLondon — Fri, 03 Jul 2009 03:25:27 GMT

A friend of mine had the same problem after transporting his 6000. We removed the cloth and we just had to touch the driver and it poped back in place - and that was sorted.

Re: Beolab 6000 distorted bass

ChrDH — Fri, 03 Jul 2009 03:07:44 GMT

Yes it is a pity with the 6000, and that is what prevents me from buying a pair. I love my BL4000 (first prize a year ago ), they really seem a perfect mix of sound, design and built quality.

Chr

Re: Beolab 6000 distorted bass

Jonathan — Thu, 02 Jul 2009 20:03:09 GMT

Dave:

why do they use rubbish drivers??

I had a look at my beocenter1 speakers the other day and yeah wow, really rubbish cardboard and foam... i can't say the same for BL4000 though they seemed like much better quality drivers.

Ker-ching the almighty $$$

Re: Beolab 6000 distorted bass

Dave — Thu, 02 Jul 2009 19:10:26 GMT

why do they use rubbish drivers??

I had a look at my beocenter1 speakers the other day and yeah wow, really rubbish cardboard and foam... i can't say the same for BL4000 though they seemed like much better quality drivers.

Re: Beolab 6000 distorted bass

TWG — Thu, 02 Jul 2009 17:17:02 GMT

Peter :

In common with a number of B&O speakers, the sum of the parts works rather better than the individual items might suggest. The quality of the drive units is however disappointing as the longevity is not that great. The upside is that they are cheap to replace!

Than it should be a nice experiment to exchange all the chassis with real(!) high end speaker chassis!? Perhaps than the Beolabs will blow you away!?

Re: Beolab 6000 distorted bass

Peter — Thu, 02 Jul 2009 16:51:16 GMT

In common with a number of B&O speakers, the sum of the parts works rather better than the individual items might suggest. The quality of the drive units is however disappointing as the longevity is not that great. The upside is that they are cheap to replace!

Re: Beolab 6000 distorted bass

9 LEE — Thu, 02 Jul 2009 16:48:18 GMT

I must agree. Whichever engineer had that plonked in his hand to give the seal of approval to obviously didn't go much on aesthetics.

They're push fit connectors on the back too - not even soldered! In fact, they connect just like cheap car spe..... hey, hang on!

Re: Beolab 6000 distorted bass

joeyboygolf — Thu, 02 Jul 2009 16:36:59 GMT

koning:

The bass drivers from the beolab 6000 looks like a cheap car speakers.

I think that statement is an insult...............to cheap car speakers!!

Re: Beolab 6000 distorted bass

koning — Thu, 02 Jul 2009 12:01:10 GMT

The bass drivers from the beolab 6000 looks like a cheap car speakers.

Why didn't the make a motification for these drivers?

Re: Beolab 6000 distorted bass

joeyboygolf — Thu, 02 Jul 2009 11:59:22 GMT

Agree with Lee. I've just replaced a set and it's not the first I've done.

Re: Beolab 6000 distorted bass

9 LEE — Thu, 02 Jul 2009 11:41:49 GMT

Slide up the front cloth grilles and gently pop them off,

Then play some music at higher volume, and you should see the bass drivers flapping around like a butterfly in a whirlwind.

It will be the driver rubbers split. You will need four, probably.

Seems to be happening quite a lot to the older ones now - i always check ours as a matter of course.

Lee

Beolab 6000 distorted bass

WDPE — Thu, 02 Jul 2009 10:39:58 GMT

Hello everybody,

I've been using a pair of beolab 6000 speakers with a beosound 3000 for over 7 years without having any problems or changing the setup in any way.

However, recently, when I turn up the volume just a bit higher then the standard playing volume, the lower sounds seem distorted.

The sounds resembles a sort of resonance, but this isn't the case. Both speakers seem to have got the problem.

Any thoughts?

Kind regards.