https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/21382.aspxTue, 12 Jun 2007 12:30:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21382micke0https://archivedforum.beoworld.org:443/forums/thread/21382.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21382<div>Problem solved!</div><div></div><div>I think it was the shield cable that got in contact with the datalink in the first box.</div><div>When I opened the box there were one tiny shield&nbsp;wire&nbsp;very close&nbsp;to the datalink and at least&nbsp;two more spreading from the shield cable.</div><div></div><div>But I have to admit that I also turned the system off (pulled the plugs)&nbsp;before doing this so it could have been the &quot;hard reset&quot; that solved it, but it&#39;s most likely the cables.</div><div></div><div>Thanks guys</div><div></div><div>Mikael</div><div></div><div></div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/21324.aspxTue, 12 Jun 2007 07:32:27 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21324Peter0https://archivedforum.beoworld.org:443/forums/thread/21324.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21324Always worth a hard reset! Switch everything off - leave for 5 minutes and switch it back on again!!<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/21321.aspxTue, 12 Jun 2007 06:50:35 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21321micke0https://archivedforum.beoworld.org:443/forums/thread/21321.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21321<div>Thanks for your answers.</div><div></div><div>Yes, both link rooms have the&nbsp;same problem so if it&#39;s the datalink then it must be somewhere up to the first box.</div><div></div><div><div>The system has not been changed or moved at all. Last time I know it worked was on friday last week.</div><div></div><div>I will take a look at the wall connection and boxes up at&nbsp;the attic to see if they are connected correctly.</div><div></div><div>/mikael</div></div><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/21200.aspxMon, 11 Jun 2007 15:37:47 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21200Peter0https://archivedforum.beoworld.org:443/forums/thread/21200.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21200If it has been moved recently, check the right and left plugs are in the correct outlets in the back of the Beomaster 7000.<br /><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/21185.aspxMon, 11 Jun 2007 15:19:42 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21185Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/21185.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21185<p>Mikael,</p><p>Thinking more about the problem you highlighted, it sounds that you are missing the power on the datalink cable.</p><p>I suggest you start by checking the output from the BM7000</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/21181.aspxMon, 11 Jun 2007 15:15:11 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21181Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/21181.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21181<p>Mikael,</p><p>If both link rooms have the same problem, then that narrows it down to a possible datalink cable issue or drivers/receivers in the BM7000</p><p>When was the last time it worked correctly ? what has changed to your configuration since it last worked ?</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/21178.aspxMon, 11 Jun 2007 15:04:05 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:21178micke0https://archivedforum.beoworld.org:443/forums/thread/21178.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=21178<div>Hello,</div><div></div><div>I have a Beosystem 7000 with 2&nbsp;link rooms (MCL).</div><div>This morning I found out, the hard way, that the timer function in my link rooms&nbsp;didn&#39;t work anymore.</div><div></div><div>I can turn on and off the link room but I can&#39;t control the BM7000 (adjust volume, change source).</div><div>The mute control light doesn&#39;t light anymore, it only flashes when I&nbsp;use the remote.</div><div></div><div>Everything works correct in the main room.</div><div></div><div>My guess is that the datalink cable is disconnected somewhere. </div><div>But before I head up to the attic I would like to see if there can be anything else?</div><div></div><div>regards&nbsp;</div><div>Mikael&nbsp;</div><div style="clear:both;"></div>