https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/209119.aspxTue, 09 Jun 2009 05:27:59 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:209119Burnix0https://archivedforum.beoworld.org:443/forums/thread/209119.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=209119<p>Hi Keith,</p> <p>Your picture also shows, that there are 2 clips in the top of the handset (one at the IR lens and one in the other side -&nbsp;not marked with a red description). My experience is that these are the must vulnerable and that they break easily. Therefore I also recommend that the backpart is moved upwards to avoid breaking the last two clips.</p> <p>Other than that I think your images and the description is great.</p> <p>Br,<br />Burnix</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/208900.aspxMon, 08 Jun 2009 05:41:29 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:208900Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/208900.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=208900<p>The cover is held in 4 places as shown below.</p> <p>The correct way of opening the unit is to slip the tool or very thin flexible blade either side of the top of the battery compartment allowing the back to lift 1-2 mm, with both sides lifted a couple of milli metres, then insert the tool near the ear piece and the phone will come appart</p> <p><img src="http://195.173.140.100/Beoworld/Removing_Beocom_1_Cover.jpg" alt="" /></p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/208857.aspxSun, 07 Jun 2009 23:16:25 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:208857mediabobny0https://archivedforum.beoworld.org:443/forums/thread/208857.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=208857<p>I&#39;m trying to change the cover colors on two Beocom 1 handsets I have.&nbsp; I have no problem removing the battery cover and the two screws inside there.&nbsp; But I can&#39;t seem to pry loose the main shell.&nbsp; I&#39;m inserting a butter knife in the groove on the side but no luck prying it&nbsp;off.&nbsp; What&#39;s holding it on?&nbsp; Thanks in advance.&nbsp;&nbsp; </p><div style="clear:both;"></div>