General Forum

Re: link problem

gbsub — Sat, 23 May 2009 05:04:44 GMT

Hi,

you must setting the Bs 9000 as A.OPT 0 and the MX7000 as V.OPT 2.

This is the only right way.

Best regards.

gbsub

Re: link problem

Gerd — Fri, 22 May 2009 14:22:04 GMT

Try setting both to option 1.5

Re: link problem

Jonathan — Thu, 21 May 2009 19:45:41 GMT

.... no luck. I tried both ways and still have the same problem.

Re: link problem

tournedos — Thu, 21 May 2009 06:02:59 GMT

There must still be something wrong - in option 1, the audio/video products should not send the commands further to each other on the AVL cable (which is happening when you get duplicates), and only respond to their "own" commands.

I suggest you reprogram the options, and keep the other kit disconnected from mains while doing it (not sure if it affects anything, but I'm superstitious that way...).

Re: link problem

PhilLondon — Thu, 21 May 2009 06:01:09 GMT

Have you verified that the Red led blinked when you changed the V.OPTION and the A.OPTION to 1?

Re: link problem

Jonathan — Thu, 21 May 2009 05:48:34 GMT

Hi Phil,

Thanks for your response. I set them both to option 1, and still the same problm. When I remove the cable between the two, all operates perfectly as normal. Odd huh?

Re: link problem

PhilLondon — Thu, 21 May 2009 05:31:39 GMT

If they are in the same room, they should both be in Option 1.

L option is for link dedicated products (Beolab 2000, 3500...)

link problem

Jonathan — Thu, 21 May 2009 05:24:20 GMT

Hi,

I have a Beocenter 9000 linked to an MX7000. Using my remote, i set both to option 2. The problem I'm having is that they both respond to one click of the remote as two clicks eg when I want to skip one track on a CD it skips two tracks. Anyone know what I'm doing wrong? Have I set the wrong options?

Also, what is L option? (V option is Video an A Option is Audio)