General Forum

Re: Beomaster 3500 CODE

Peter — Wed, 20 May 2009 10:34:36 GMT

Very pleased to hear it is working.

Re: Beomaster 3500 CODE

Dennis — Wed, 20 May 2009 10:21:18 GMT

I tried to enter the code 2 times, but there was no respons, so i tried to connect it to my Beovision LX5500 and then the CODE sign was gone and then the Beomaster 3500 was working :) I don't now if that was the code but it can be that there wasn't any respons caused of, that the Beomaster was in option 0. The Beomaster is also working without Beovision :)

Thanks for the help :)

Best Regards

Loudspeaker

Re: Beomaster 3500 CODE

Dennis — Wed, 20 May 2009 02:42:39 GMT

That is the same code than for Beomaster 4500 and Beocenter 9500 and mayby then also for Beomaster 3500.

Ignace wrote:

I can't think of another code than the one Peter mentioned in the other topic :

- power off on Beomaster (disconnect from mains)
- on Beolink 1000, press RADIO
- plug in Beomaster 4500 (connect to mains)
- press 1271 PLAY on Beolink 1000

I will try the code when i come home. I hope that it works :)

Best Regards

Loudspeaker

Re: Beomaster 3500 CODE

Peter — Wed, 20 May 2009 00:49:12 GMT

I take it that you have tried the 9500 code? The 3500/4500 is really a disassembled 9500 in many ways!

Re: Beomaster 3500 CODE

Peter — Wed, 20 May 2009 00:43:38 GMT

Sorry I cannot think of anything else. Please do let us know if you find a solution as we will put it on site.

Re: Beomaster 3500 CODE

Dennis — Wed, 20 May 2009 00:39:43 GMT

I have 2 Beomaster 3500 so mayby i can take some parts from that. I have replaced the software with another. I will try to call a B&O repair shop today and find out if they have a code, beacause i think that there also must be activatet a code when the Beomaster 3500 is finished on the factory. I have also read that Peter Pan had his Beocenter 9300 to repair, and when he had it back from the repair shop, it wasn't working because the code wasn't entered after replacing something.

Best Regards

Loudspeaker

Re: Beomaster 3500 CODE

Dillen — Tue, 19 May 2009 17:16:09 GMT

Sad case.

I suppose you could try putting the Beomaster in TEST mode and then press 7.
That will load default values into the RAM (if it works in your Beomaster).

What did you replace and why ?

Martin

Re: Beomaster 3500 CODE

Peter — Tue, 19 May 2009 17:00:10 GMT

Not sure you want to see this - have a look at the BM4500 service manual - the supplement for the 3500 is at the back

Beomaster 3500 CODE

Dennis — Tue, 19 May 2009 14:48:10 GMT

Hi there

I have just replaced af piece in my Beomaster 3500, and now the display shows CODE. Does anyone know that code? I hope that you can help me. It would be great, if you that have replaced your SW still have the code.

Best Regards

Loudspeaker