Re: Difference between SW 5.08a and 5.02a

Doc — Sun, 17 May 2009 10:40:26 GMT

Thanks Quim!

Re: Difference between SW 5.08a and 5.02a

Quim43 — Sun, 17 May 2009 06:09:57 GMT

Keith Saunders:

The following problems are fixed with software version 5.08:-

TV switches off, if two-way IR products are used in the same room.

Speaker mode changes when changing channel, seen on DVB-HD and external STB

Clicking noise from centre/front speaker when changing channel on an external set-top box connected by HDMI/SPDIF, after updating to software version 5.02

No video on built-in DVD after software update 5.02 (US version only)

Not possible to change Region code on DVD

Switching to built-in DVB-T/S picture format is locked to format 3, until the next time the channel is changed.

From standby, picture format from internal DVB module cannot be changed. Locked to last shown format from before standby.

If DVD loader is opened twice in standby, it might take up to three attempts to play a DVD when selected

STB connected via HDMI is not always switched off.

STB connected with HDMI and SCART/CVBS cannot be controlled in a link room if main room TV is switched off

Error message with SKY HD box in link room, if main room TV is switched off

Difference between SW 5.08a and 5.02a

Doc — Sun, 17 May 2009 05:49:46 GMT

Is there a difference between SW 5.02a (which I have) and 5.08a ? And if so, what difference is there / which issue's should 5.08a solve?

(it's the SW of a BV7-40 mkIII)

General Forum

Re: Difference between SW 5.08a and 5.02a

Re: Difference between SW 5.08a and 5.02a

Difference between SW 5.08a and 5.02a