Re: HELP Does my Beosound 3 has an error ?

.......... — Mon, 11 May 2009 15:43:35 GMT

You need to set the clock first.

Set the built-in clock

> While the system is in standby, press and hold

ST.BY until the time

blinks in the display. If no time is set, the display shows ‘- -.- -’ instead

of digits.

> Press up or down to find the correct time. Holding down a button

accelerates the search.

> Press

STORE to store the correct time.

> To see the time permanently in standby, press

ST.BY while the system is in standby. Press ST.BY

again to cancel time viewing in standby.

And to set up the timer function:

Make a Wake-up Timer

The Wake-up Timer is a once-only Timer, and must be programmed each

time you wish to use it.

> While the system is in standby, press

TIMER. The time for the latest

Wake-up Timer is shown in the display. The digits blink.

> Press up or down to find the time you want the system to start playing.

Press and hold up or down to step quickly to the desired time.

> Press the button of the source you want to use for your Wake-up timer;

RADIO or A MEM. ‘Pr’ (for a radio program) or ‘A’ (for A MEM)

is shown in the display. If you do not choose a source, the radio is used.

> Press

STORE to store the Wake-up Timer. The time for the Wake-up Timer is briefly shown in the display.

Check or delete a Wake-up Timer

> While the system is in standby, press

TIMER. The time for the Wake-up Timer blinks in the display.

> Press

STORE to confirm your Wake-up Timer, or…

> …press

DELETE to delete the Wake-up Timer. ‘-.--’ is shown briefly in

the display.

Snooze

You can activate a snooze function when a Wake-up Timer switches on

the radio or starts memory card playback. Pressing any button or turning

the wheel within the first ten seconds switches off the system for ten

minutes, after which the Wake-up Timer is executed once more. You can

activate the snooze function as many times as you like.

Hope this helps! :-)

HELP Does my Beosound 3 has an error ?

Olof — Mon, 11 May 2009 14:37:38 GMT

When i try to programm the wake up timer (1.pressing TIMER, 2. pressing store) the wake time starts flashing in the display. I also cant change the wake up time by using the arrow buttons ? The system is connected with the wallplug.

General Forum

Re: HELP Does my Beosound 3 has an error ?

HELP Does my Beosound 3 has an error ?