General Forum

Re: Beocenter 9300

BenSA — Mon, 11 May 2009 03:02:34 GMT

Hi Jan

I did realise that is what you meant.

Any advice or suggestion is always worthwhile!

Re: Beocenter 9300

birgerbum — Sun, 10 May 2009 16:10:38 GMT

Hi Bensa

That's what I ment by chanching the battery as I have had a few cases with strange behavior as the battery was low and there was no indication from the display.But I will not make more comments on this issue as there are a few wise guy's who seems to know better.

regards

jan

Re: Beocenter 9300

BenSA — Sun, 10 May 2009 15:04:03 GMT

I suppose that by removing the battery, everything is cleared from the memory. One could then just put the original back. There obviously must be a way to also clear it using the remote.

Re: Beocenter 9300

Craig — Sun, 10 May 2009 07:31:26 GMT

joeyboygolf:

Correct, I believe Craig. At least, that is what I have read in one of the service manuals, Can't recall which one!

Think it is the 9500 Graham, but I may be wrong.

Craig

Re: Beocenter 9300

joeyboygolf — Sun, 10 May 2009 07:27:28 GMT

birgerbum:

Hi Graham

A nother thing that came to my mind why don't you suggest a solution as you are expirienced with these machines.

regards

jan

I suggest deletion of all preset programs using the built in test menu as outlined in the service manual which can be downloaded from this site.

Re: Beocenter 9300

birgerbum — Sun, 10 May 2009 06:53:21 GMT

Hi Graham

A nother thing that came to my mind why don't you suggest a solution as you are expirienced with these machines.

regards

jan

Re: Beocenter 9300

birgerbum — Sun, 10 May 2009 06:33:40 GMT

Hi Graham

That was just a suggestion as I once have solved a bc 9500 with somewhat strange problem by chanching the battery.

regards

jan

Re: Beocenter 9300

joeyboygolf — Sun, 10 May 2009 04:55:24 GMT

Correct, I believe Craig. At least, that is what I have read in one of the service manuals, Can't recall which one!

Re: Beocenter 9300

Craig — Sun, 10 May 2009 02:55:25 GMT

Always thought that if the internal lithium battery needs replacing the the word "code" is shown on the display?

Craig

Re: Beocenter 9300

joeyboygolf — Sun, 10 May 2009 02:29:24 GMT

birgerbum:

Hi

I think it has to do with the timer/clock funcktion try to unplug it from the mains in approx 5 minutes and plug it in again.ore change the lithium battery inside the 9300.

regards

jan

@ birgerbum

Your universal cure for problems with BC9000/8500/9500/9300 seems to involve changing the lithium battery!

I have direct experience of many of these fine systems and I have never had to change the lithium battery.

Can you quote examples of what has actually been cured by this action or do you simply have shares in the manufacturer of lithium batteries????

Re: Beocenter 9300

birgerbum — Sat, 09 May 2009 21:53:57 GMT

Hi John

Oh! and welcome to beoworld

regards

jan

Re: Beocenter 9300

birgerbum — Sat, 09 May 2009 21:50:44 GMT

I think it has to do with the timer/clock funcktion try to unplug it from the mains in approx 5 minutes and plug it in again.ore change the lithium battery inside the 9300.

regards

jan

Beocenter 9300

jsallen999 — Sat, 09 May 2009 21:00:19 GMT

I have a Beocenter 9300 that automatically switches itself off after about an hour, but there are no programmes in the machine! Can anyone advise how to clear what appears to be a phantom programme.

John