https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/20251.aspxThu, 07 Jun 2007 11:10:48 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:20251Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/20251.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=20251<p>Quite a common problem and certainly nothing to do with the Beovision 6-22</p><p>This tends to happen for one of the following reasons:-</p><p>1) The Pace STB has a fault or needs a software update</p><p>2) The aerial signal is below 60% which would allow you to still have a reasonable analogue picture, but is likely to provide picture and sound mismatch on digital&nbsp;-- unlikely if you are using the same aerial for your AVANT which you say is fine.</p><p>I think the best first action would be to use the STB which is working on your AVANT and put it on the BeoVision 6-22 and if it works without problems, then you know you have a problem with the Pace STB</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/20201.aspxThu, 07 Jun 2007 06:50:24 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:20201jgn0https://archivedforum.beoworld.org:443/forums/thread/20201.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=20201<p>When I use my Beovision 6-22 with an NTL (Pace cheapie box) STB, I am getting a lip sync problem.&nbsp;The Beovision works fine with an analogue signal. </p><p>While I suspect the NTL box is the cause, I have&nbsp;another Avant that is&nbsp;using a similar&nbsp;NTL box without any issues.&nbsp;</p><div style="clear:both;"></div>