General Forum

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

mr_anders_son — Tue, 28 Apr 2009 09:44:31 GMT

Ok, but if you have the latest SW on Active/Passive it will work for sure

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

stefan — Tue, 28 Apr 2009 09:40:15 GMT

mr_anders_son:

But if you had MX4000 you should bought BeoLink Video for less and have full ML

Yes, shure I know. I had Beolink Video for the MX AND Beolink Active for the BM1 (PC) but it didn`t work.

Stefan

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

mr_anders_son — Tue, 28 Apr 2009 09:40:05 GMT

On my BV9 I can not change from PC to AUX...

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

PhilLondon — Tue, 28 Apr 2009 09:30:27 GMT

PhilLondon:
Would it not work if you configure the BM1 as V.AUX rather than PC on the main TV?

Mr Ansdersson... have you tried the trick above, to make it work from all room?

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

mr_anders_son — Tue, 28 Apr 2009 09:25:48 GMT

But if you had MX4000 you should bought BeoLink Video for less and have full ML

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

mr_anders_son — Tue, 28 Apr 2009 09:24:28 GMT

Yes complete BL Active

NO you connect it with ML, as you have to BV1. No more

Stefan: Yes it works. My dealer has done this when some costumer want another brand let´s say in bedroom, but will use Beo4 and the whole ML system

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

stefan — Tue, 28 Apr 2009 09:19:42 GMT

Hej Anders,

did you really try the Beolink Active solution? I had the same idea, bought an Active (1636) and installed in a room with an MX4000.

Yes, Beolink Active can understand PC and it activates the BM1 but without picture on the link.

But I could activate my BM1 in the bedroom (BV6-22) and control it via an AV9000 in another room.

Stefan

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

timhanna — Tue, 28 Apr 2009 09:16:34 GMT

How about attaching the BM1 to the BV7 in the lounge, and every time i want to interact with the BM1 via the BV1, I turn the BM1 from the lounge and then walk to the bedroom.

Would this turn the BV7 on as well, rather needlessly?

Tim

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

timhanna — Tue, 28 Apr 2009 09:13:00 GMT

Thanks guys, these are golden replies.

I suspect that the Active kit (IR eye?) has to be wired all the way to the BM1 in the lounge, since the BV1 would be in the bedroom. Basically so far Ill need to wire three cables from the lounge to the bedroom:

Masterlink, RF Antena cable and Active cable? I cant drill any walls, so running three cables (white) next to the skirting will just be ridiculous.

This is way an Apple TV would have been amazing, but shame ill need another toy to convert it to a Scart cable. Arguably a PS3 would work, no problrm but i cant control it via the STB of the BV1.

This is all like catch 22 and a billion!

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

mr_anders_son — Tue, 28 Apr 2009 09:04:46 GMT

As Stefan said BV1 can not understand command PC

You can use N.MUSIC/RADIO but you can not see anything. Same

as a link speaker

However, I have BV6-22 in my dressingroom and if I turn on BM1 with that, and

then go to my BV1 in kitchen I can pilot and see playlist etc etc.

It´s just that old BeoVision can not activate "PC"

If you buy a Beolink Ative and use it in the same room as BV1 you can have full acces to BM1

I must say that it´s pretty good picture on BV1 from BM1. You have no problem to read etc

On my BV6 it´s more poor, and that is because it´s LCD

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

stefan — Tue, 28 Apr 2009 09:04:33 GMT

@tim

You control N.MUSIC, N.RADIO like you would control RADIO or CD, as audio source, without picture.

Yes, timer play is possible. You can select N.MUSIC or N.RADIO in the timer menu of the BV7. You can also select a number but I don`t think it will play a specific playlist - I never tried.

@phil

V.AUX would be the solution. But unfortunately the BM1-menu V.AUX is greyed out when BM1 is connected to a BV7. You have to configure it as PC....

Stefan

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

PhilLondon — Tue, 28 Apr 2009 08:43:07 GMT

stefan:
You can`t activate the BM1 from your BV1, because BV1, MX-beovisions and other older TVs do NOT understand the PC command.

Would it not work if you configure the BM1 as V.AUX rather than PC on the main TV?

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

timhanna — Tue, 28 Apr 2009 08:34:13 GMT

When you say activate N.MUSIC, does that mean that i would be able to see the mp3s that ive selected? or is it just next, previous, pause that i can only use and then be forced to navigate it blindly?

One last thing, can i have a timer start to use it as an alarm clock that the bedroom BV1 can wake me up with N.Music BUT from a specific playlist for example?

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

timhanna — Tue, 28 Apr 2009 07:45:55 GMT

Thanks Stefan... that's not good news. I expected more from B&O, especially how they make linking things part of their achievements.

No worries. Thanks again

Re: Linking a BeoMedia 1 (BM1) to a BeoVision 1 (BV1)

stefan — Tue, 28 Apr 2009 05:47:40 GMT

You can`t activate the BM1 from your BV1, because BV1, MX-beovisions and other older TVs do NOT understand the PC command. But you can activate N.MUSIC, N.RADIO from your BV1 - as audio source without picture. PC will work with newer TVs like BV6/BC6, BV8, BV7. You will have full control over the link. Hope this helps.

Stefan