General Forum

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Tue, 21 Apr 2009 11:32:39 GMT

Hvor mye er det noe sånt pleier å koste?

Re: Connecting BeoSound Overture to MX7000

birgerbum — Tue, 21 Apr 2009 10:15:09 GMT

Hej Lars

Jeg det kan du godt.Jeg har en til salg hvis du er interreseret

Venlig hilsen

Jan

Re: Connecting BeoSound Overture to MX7000

Russ — Tue, 21 Apr 2009 10:15:09 GMT

Forgive the follow-on question from across the pond, but with our different product line-up and all the switching back and forth between Norwegian (I presume) and English, I may have missed something here.

If the Audio Master in question is, in fact, a n Ovetür, then it can't communicate with the MX via the Aux socket, as the Overtür is an ML system and has no DataLink on the Aux. So, either we're dealing with a 2500 and a very early MX-7000, or a mis-matched combination, or an Overtür and a more modern MX-7000, in which case we should be talking about an ML connection. In the case of a mis-match (ML Overtür/MCL MX-7000, shouldn't we be suggesting the BeoLink Converter instead of the ML>MCL converter?

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Tue, 21 Apr 2009 09:52:16 GMT

Could I use a Beomaster 5000 receiver to connect my passive speakers.?

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Sun, 19 Apr 2009 12:30:29 GMT

Tusen takk for all hjelp!

Re: Connecting BeoSound Overture to MX7000

birgerbum — Sun, 19 Apr 2009 10:19:05 GMT

Hej larsbergen

Vi tar den på dansk.Du kan bruge en hvilken som helst stereoforstærker det behøver ikke at være en B&0 blot den har linieindgange med rca tilslutninger men selvfølgelig helst en af god kvalitet.Du kan så gemme den væk i et skab og sætte volumen på den i den position du nu finder mest egnet

mvh

jan

Ønsker du det på engelsk så svar tilbage

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Sun, 19 Apr 2009 10:01:34 GMT

Bergen Norway

Re: Connecting BeoSound Overture to MX7000

birgerbum — Sat, 18 Apr 2009 19:28:33 GMT

Hi L

HiLars

Where are you located

regards

jan

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Sat, 18 Apr 2009 12:36:43 GMT

Great advice! Thank you ever so mutch. I really like the FM wireless transmitter idea. Less cables is alway great, well no offence to you! Is there any noticeable reduction in the sound quality if you choose this solution?

Last but not least, are there any B&O amplifiers for passive speakers that you would recommend?

Lars

Re: Connecting BeoSound Overture to MX7000

Steve at Sounds Heavenly — Fri, 17 Apr 2009 12:00:38 GMT

Hi Lars,

Sorry for the delay in responding to this thread, as I've been very busy in the last few days. Your Tandberg speakers need an amplifier to connect them to any modern B&O equipment, this can be done easily using a conventional hifi amplifier.

Connect a "Powerlink to RCA Adapter Cable" to one of your Powerlink sockets on the Ouverture and then into a line or tape input on the amplifier. Then connect the Tandberg speakers into the speaker sockets of the amplifier.

If your Aux socket is in use connecting the Ouverture to your MX7000, then you may be best to use an FM wireless transmitter to send your iPod sound to the Ouverture, otherwise you could connect this into the MX7000 using an iPod to SCART cable and this can then be switched to either the TV or audio system speakers as required. The lack of spare input sockets on the Ouverture is a common issue!

If you need any assistance in locating the correct cables, please just ask, or click my sponsor link at the foot of this page.

Best regards,

Steve.

Re: Connecting BeoSound Overture to MX7000

birgerbum — Fri, 17 Apr 2009 10:22:26 GMT

Hej larsbergen

Jeg har nu en fornemmelse at du er dansk jo du kan bruge begge men du skal have et powerlink kabel(2) som tilsluttes dine powerlink udgange på din ouverture og tilsluttes powerlink indgangene på din mcl box derefter tilslutter du dine passive højtalere til din mcl med almindelige højttalerkabler forskellen på de 2 boxe er så vidt jeg ved noget omkring noget remote control

mvh

jan

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Fri, 17 Apr 2009 07:53:32 GMT

Can I use both:

ML/MCL MCL-2P - forstærker

Ouverture -> Powerlink -> (ML/MCL or MCL - 2P) -> Five din to ?

Or should I use:

Ouverture -> Powerlink -> Beolink Passive -> Five din to ?

Just tested the CD player! It´s so amazing. The sound is great through the MX7000!

Re: Connecting BeoSound Overture to MX7000

birgerbum — Fri, 17 Apr 2009 06:48:02 GMT

Hi larsbergen

You cannot use the powerlink for you ipod you have to buy a spiltter to your aux on your 2300 that spilts the aux into two din 5 pin connections

regards

jan

Re: Connecting BeoSound Overture to MX7000

LarsBergen — Fri, 17 Apr 2009 04:09:31 GMT

Thank you so mutch! I was trying to connect my Ipod through the aux slot on the ouverture, and the I was able to listen to radio through the tv speakers. But then I have no place to connect my Ipod. I tryed them in the powerlink slots but i got nothing. How many pins should there be in the powerlink to rca (red/white) converter cable? The one I´m using has got 5 pins

Re: Connecting BeoSound Overture to MX7000

birgerbum — Thu, 16 Apr 2009 22:02:10 GMT

Hi Lars

I went to sounds heavenly's site and could not find what is needed

if you still want to use your tandberg speakers you have to use an

external ampilfier like the b&0 ML/MCL converter.You can find it on this site under

products music systems regards jan