General Forum

Re: BV7MK3 Still has problems

moxxey — Fri, 03 Apr 2009 08:50:30 GMT

As I said, it's completely resolved any outstanding issues, including the link room problems. All fine now.

Re: BV7MK3 Still has problems

tobeyone — Fri, 03 Apr 2009 06:50:15 GMT

Moxxey...did this sort out your HDCP problems in link room as well? How long has it been stable for?...Mike

Re: BV7MK3 Still has problems

Bv7Mk3 — Fri, 03 Apr 2009 06:28:48 GMT

Yes too long but now all should be well

Re: BV7MK3 Still has problems

moxxey — Fri, 03 Apr 2009 06:14:29 GMT

Although this is of no help to anyone, I've had absolutely no further problems with my BV7-40 MKIII software, since being upgraded to sw 5.08. Mind you, it took over a year to get it right!

Re: BV7MK3 Still has problems

Bv7Mk3 — Thu, 02 Apr 2009 16:16:23 GMT

Glad to hear you got it sorted

Re: BV7MK3 Still has problems

Seanie_230 — Thu, 02 Apr 2009 13:53:54 GMT

thanks for your reply

after reading it i tired something

i turned the power off and pulled the scart lead out and it seem to be in sync again and working as it shoudl without the scart lead.

perhaps if you use the scart lead it then gets confused / out of sync when the lead is removed.

Now the TV is doing as its told but i had to power reset the system and being with the lead out.

Thanks

Re: BV7MK3 Still has problems

Seanie_230 — Thu, 02 Apr 2009 13:31:13 GMT

there is no porblem apart from being told that it would not need one.

Scart is being phased out slowly so you think a solution woudl be made

also dont see people with blue ray players connected via HDMI need to use a scart lead for STB Control

Re: BV7MK3 Still has problems

Bv7Mk3 — Thu, 02 Apr 2009 13:30:57 GMT

I have a Sky Hd box and im useing the Hdmi lead only and no scart..Mine is fine! I have a Bv7Mk3 and the latest software which was up dated tuesday.

On the old software the sky box would turn on but not off from the remote but all is well now and have the 24p playback as well.One of my bluerays would not work,had sound and no picture till the 24p up date and now I have both!

Re: BV7MK3 Still has problems

tournedos — Thu, 02 Apr 2009 13:14:17 GMT

Seanie:

if i have the scart lead out the tv sends the "ON" command to the sky box everytime i switch the tv on so then every other time i turn the tv on it turns the sky box off.

It probably uses the pin 8 signal to determine if the box is on or off.

What I don't understand is: what's the problem with having the SCART connected?

BV7MK3 Still has problems

Seanie_230 — Thu, 02 Apr 2009 12:34:45 GMT

after all the problems with BV7 and software 4.24 and tv crashes etc i have had my tv updated to 5.08 yesterday to fix the problem of sky HD getting out of sync and guess what it still does not work.

If i take the scart lead out the number buttons do not work on the beo4 to the sky box.

if i have the scart lead out the tv sends the "ON" command to the sky box everytime i switch the tv on so then every other time i turn the tv on it turns the sky box off.

having the scart lead in makes everything work properly so far

i thought in this day and age that scart could be left out.

I am very un-happy with my BV7MK3