General Forum

Re: Beosystem 5000 Family - Front See Through Panel Replacements

Dillen — Thu, 09 Apr 2009 16:32:19 GMT

Why not just get a good used original front panel ?

Is it for a Beomaster, Beocord or ?

Place an ad in the Private Wanted section.

Martin

Re: Beosystem 5000 Family - Front See Through Panel Replacements

ouverture — Thu, 09 Apr 2009 15:25:30 GMT

can now confirm it is 3mm thick

does anyone have a broken piece they can post to me by chance, I think I can get a single sheet of perspex the right colour, and provide a service ( at cost and p&p ) for replacement front panels for the 5000 family if I can get the colour right.

Re: Beosystem 5000 Family - Front See Through Panel Replacements

ouverture — Thu, 19 Mar 2009 06:17:52 GMT

it is not glass Craig, I am prety sure it is "Acrylic Glass" , aka Perspex or Plexiglas

http://en.wikipedia.org/wiki/Acrylic_glass

I measured the front of my Beocord and the recess for the front panel ( the depth ) is between 3mm and 4mm

Has anyone actually measured the depth with calipers a front panel on a 5000 family unit ??

Re: Beosystem 5000 Family - Front See Through Panel Replacements

Craig — Sun, 15 Mar 2009 16:46:31 GMT

ouverture:

good, I think it is probably 3mm or 4mm thick Perspex

http://www.gcip.co.uk/pdf/perspex_new_colour_chart.pdf

It's no where near that thick. More like 1mm having taken a closer look. Also I think it may be glass!!!

Craig

Re: Beosystem 5000 Family - Front See Through Panel Replacements

ouverture — Sun, 15 Mar 2009 08:58:22 GMT

good, I think it is probably 3mm or 4mm thick Perspex

http://www.gcip.co.uk/pdf/perspex_new_colour_chart.pdf

Re: Beosystem 5000 Family - Front See Through Panel Replacements

Craig — Sun, 15 Mar 2009 08:37:49 GMT

It is what I would call a smoke tint, it is not very far off been clear. It apears to be a thin plastic from what I can see, although with it in place there is no way of telling the thickness.

Craig

Re: Beosystem 5000 Family - Front See Through Panel Replacements

ouverture — Sun, 15 Mar 2009 08:35:03 GMT

thanks Craig, is it a slight dark tint, a kinda greyish smoke ??

also can you tell what it is made of , I am guessing some acrylic type of plastic, and how thick it is

many thanks

Re: Beosystem 5000 Family - Front See Through Panel Replacements

Craig — Sun, 15 Mar 2009 07:55:29 GMT

Just had a look at a Beocord 5000 I have in bits at the moment. There is a slight tint to it, also the Beocord has lettering set into the acrylic. Where it says "recording possible"

Craig

Beosystem 5000 Family - Front See Through Panel Replacements

ouverture — Sun, 15 Mar 2009 07:29:44 GMT

how easy is it to get replacement plastic / acrylic fronts for the BS 5000 family ??

http://www.beoworld.org/prod_details.asp?pid=717

I have one unit that I would like to replace the plastic front to, it is 42cm wide and 2cm high

What are they made of - acrylic, or some sort of hardened plastic maybe ??

Also what colour are they, when I shine a torch at it, it looks clear to me, but it could be tinted, I don't really want to remove it to find out, but I will if I know I can get a replacement easily !