General Forum

Re: Beocom 2 'No contact with base' problem

glug — Wed, 04 Mar 2009 11:34:12 GMT

Thanks for the replies. it is a combined base and charger without a button.

If there are any more suggestions for registering the base to the handset without going back to the shop I would be glad to hear them.

Many thanks

glug

Re: Beocom 2 'No contact with base' problem

Hiort — Wed, 04 Mar 2009 06:48:21 GMT

I think you should take it back to have the dealer to fix it. I assume you have the combined charging and base station. I recall I had similar problems with my first Beocom 2.

If you have the separate base station, you press a small button on the base to put it into registartion mode. Then you go into the menu on the Beocom 2 and ask it to register to base.

Re: Beocom 2 'No contact with base' problem

glug — Wed, 04 Mar 2009 04:44:48 GMT

Is that a simple procedure or should a dealer take care of it?

thanks

Re: Beocom 2 'No contact with base' problem

Hiort — Wed, 04 Mar 2009 03:05:58 GMT

Maybe you should register it to base again?

Beocom 2 'No contact with base' problem

glug — Tue, 03 Mar 2009 16:33:09 GMT

I have recently replaced a faulty transformer that was failing to charge the handset.

The handset now charges and the menu functions are working but the 'Information' screen is constantly on and when I press OK the display says 'No contact with base'.

Can you tell me how to move on from this problem?

Many thanks