https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/187620.aspxTue, 03 Mar 2009 15:39:13 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:187620Keith Saunders0https://archivedforum.beoworld.org:443/forums/thread/187620.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=187620<p>Peter,</p> <p>If you want the PIP module for your AVANT 50 Hz (Mark I or Mark II) then you would need the one &quot;Large48&quot; has got namely a type 4141</p> <p>If you also want Dolby Surround Sound then that is type 4140 and the NICAM decoder is 4144</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/187587.aspxTue, 03 Mar 2009 14:54:35 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:187587Large480https://archivedforum.beoworld.org:443/forums/thread/187587.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=187587<p>Hi Gerd,</p> <p>The paperwork says its for:</p> <p>1414100 - 50Hz</p> <p>1415100 - 100Hz (28&quot;)</p> <p>1416500 - 32&quot;</p> <p>It looks like I have a Brand New PiP module for a 50Hz Avant then... :-(</p> <p>Oh well - any takers?</p> <p>NEW in box unused! - RRP = &pound;170 = ouch!</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/187565.aspxTue, 03 Mar 2009 14:13:39 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:187565ouverture0https://archivedforum.beoworld.org:443/forums/thread/187565.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=187565<p>I have an Avant Type 81/33, and would like a PIP module for it, do you know which one i need Gerd ?</p> <p>I am also after Pro Logic Surround module and STB-C </p> <p>&nbsp;</p> <p>thanks</p> <p>Peter</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/187552.aspxTue, 03 Mar 2009 13:12:56 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:187552Gerd0https://archivedforum.beoworld.org:443/forums/thread/187552.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=187552<p>PiP module for your Avant is 4165, not 4141! </p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/187541.aspxTue, 03 Mar 2009 12:29:51 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:187541Large480https://archivedforum.beoworld.org:443/forums/thread/187541.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=187541<p>Ok so while playing with my Avant today I tried to install a Picture in Picture module.</p> <p>Its a Type 4141 and according to the booklet should fit into my Type 84/23.</p> <p>It says it attaches to the PCB2 which is the video processing and teletext and then the ribbon cable connect to P35 on PCB2.</p> <p>All very easy except the board itself is too large to fit as per the single diagram (I have another look for a better&nbsp;manual on here).</p> <p>Also I can&#39;t seem to find P35 which should be about an inch across!</p> <p>Anyone have any ideas?</p> <p>&nbsp;</p><div style="clear:both;"></div>