General Forum

Re: Beomaster 8000, Beovox MS 150 Speakers

Peter — Thu, 26 Feb 2009 14:28:29 GMT

My pleasure! I have been moving mine so I had not put the stands back on yet!

Re: Beomaster 8000, Beovox MS 150 Speakers

goblin99 — Thu, 26 Feb 2009 14:16:54 GMT

Hi Peter,

Thank you for taking the time to send me the exact specifications! I went down to my local hardware store and they had the appropriate bolts.

My Beo Vox MS 150's are now up on their stands and the sound is much improved.

Thanks again and best regards,

John

Re: Beomaster 8000, Beovox MS 150 Speakers

Peter — Wed, 25 Feb 2009 13:28:25 GMT

They are 3cm long from the tip to the base of the head - 1.6cm is threaded, the rest smooth. The threaded part is 0.5cm in diameter with the head being 0.8cm across.

Re: Beomaster 8000, Beovox MS 150 Speakers

Medogsfat — Wed, 25 Feb 2009 10:02:12 GMT

No prob's,

they arent actually that long - probably about 40mm and are surprisingly small bearing in mind the weight placed on them by these huge speakers.

Chris.

Re: Beomaster 8000, Beovox MS 150 Speakers

goblin99 — Wed, 25 Feb 2009 08:57:57 GMT

Thank you very much Chris. I will measure the depth and give it a try!

John

Re: Beomaster 8000, Beovox MS 150 Speakers

Medogsfat — Wed, 25 Feb 2009 02:49:07 GMT

Hi John, and welcome to Beoworld.

I don't know the exact length but I believe they are 5m bolts, you may need to put a washer behind the head as I think the original bolts had oversize heads to prevent them pulling through the holes in the stands.

Chris.

Beomaster 8000, Beovox MS 150 Speakers

goblin99 — Tue, 24 Feb 2009 18:10:50 GMT

In a recent move, the Allen Bolts that secure my speaker stands to the speakers were lost by the movers. Does anyone know how I could replace these Allen Bolts or find out the specifications for the Allen Bolts.

Thanks,

John