General Forum

Re: Rear speaker problem

Jonathan — Tue, 17 Feb 2009 21:09:28 GMT

Yesss!!!! It worked, now how do I set it to default to 5 speakers???

(if i'm not asking too much.....)

Re: Rear speaker problem

Large48 — Wed, 11 Feb 2009 03:39:45 GMT

Hi, yes you need Speaker 5 to get the rears working and the Avant changes to Pro Logic on the LCD to confirm that its worked, or at least it did on my one!

Re: Rear speaker problem

Jonathan — Mon, 09 Feb 2009 19:34:01 GMT

No, I'll try that tonight and let you know tomorrow....

Thankyou

Re: Rear speaker problem

Jandyt — Mon, 09 Feb 2009 19:13:43 GMT

I just had a play with my Avant, by removing my rears and adding them again. Pressing exit is not the problem.

I will say, however, that my Avant always defaults to Speaker 3. If I want the rears on, I have to press Speaker 4 or Speaker 5 on my Beo4.
Have you got 'Speaker' added to your Beo4 list?

Re: Rear speaker problem

Jonathan — Mon, 09 Feb 2009 19:03:01 GMT

I did that, but then had to press exit to get out of the menu....

Maybe by doing so, I cleared the setting. I tried it a few times in a row, with no success.

Re: Rear speaker problem

Jandyt — Mon, 09 Feb 2009 18:49:15 GMT

I may be wrong, but I think you should press 'Go' once you have added rear speakers, instead of 'Exit'

Andy T.

Rear speaker problem

Jonathan — Mon, 09 Feb 2009 17:59:55 GMT

Hi everyone,

I need some help with my setup.....

I have an Avant with a surround kit and a set of Lab 4s connected as front speakers. These work perfectly and are enough for the small room they are in. I have a spare set of CX100s, so thought I'd connect them through an ML/MCL converter and run them as powered rear speakers for surround sound. I connected the powerlink in to the back of the TV and entered the setup menu. After accepting the speakers and going through the noise test, all sounded good. I exited the menu and sound wasn't coming out of the rear speakers and the display shows only 3 (fronts and centre) are in operation...

Can anyone tell me where I went wrong?

Thanks in advance,

Jonathan