General Forum

Re: stb bracket for bv9; 720p model

Roger — Wed, 04 Feb 2009 13:29:09 GMT

Just checked with B&O - only the first 300 BV9's didn't have them. I do understand that you are reluctant to drill the holes, I took a couple of pictures but they didn't tell anything but the fact that I need remove some dust from the back of the telly

You can ask your dealer for a quick guide: A "Drilling and mounting instruction" (3543481), which will guide you through the drilling of new holes and how to mount the STB Cover on the back of BeoVision 9-50. It comes with four screws (4 x 2013081), for safe mounting of the STB Cover. They have supplied these free of charge to owners of the first 300 sets.

Roger

Re: stb bracket for bv9; 720p model

mjmedlo — Wed, 04 Feb 2009 11:59:38 GMT

the stb website showed the new bracket. . .i have the older one;

thanks roger. . . .would you mind sending me a picture of your install?

I'm reluctant to drill holes in the bv9. .

thanks

Re: stb bracket for bv9; 720p model

KingOfSnake — Wed, 04 Feb 2009 06:50:52 GMT

This information is freely available on the STB website, wasn't that a good place to start?

Re: stb bracket for bv9; 720p model

Roger — Wed, 04 Feb 2009 02:53:00 GMT

The BV9 comes with four holes pre-drilled for the STB cover/bracket, but the first few models didn't have them pre-drilled - which isn't a major challenge. I have one installed, and it is very convenient to access (snap off cover) and, as it is placed directly above the BS3, cable management it very easy.

Roger

stb bracket for bv9; 720p model

mjmedlo — Tue, 03 Feb 2009 22:33:17 GMT

Has anyone installed the STB bracket on the back of a 720p Beovision 9?

If so can you send me a picture, I'm just curious how it all goes together. . .
thanks

MJM