General Forum

Re: Adjusting the Picture and Font Size with BS3

Mico — Sat, 24 Jan 2009 12:50:22 GMT

thanks Mika,

yes, I was referring to the Yle subtitling. It seems that I have to live with issue.

Re: Adjusting the Picture and Font Size with BS3

tournedos — Sat, 24 Jan 2009 10:04:19 GMT

Mico:

Another question is the font size, how can I set the font size smaller for subtitles? This issue is also related to the DVB S/T module and only to the DVB-subtitling, not with the one broadcasted with fixed subtitles.

If you are talking about our domestic broadcasts, you don't - the type of DVB subtitling Yle uses delivers the subtitles as bitmaps, they are not formed in the receiver. Sure it would be possible to scale them, but the poor available resolution would probably make them look quite bad and ruin the antialiasing.

Many satellite channels use teletext subtitling, and the actual bitmaps are created in the receiver. Then it is possible to change the font and sizes, but I don't know anything about BS3...

Adjusting the Picture and Font Size with BS3

Mico — Sat, 24 Jan 2009 09:53:03 GMT

HI, I just recently replace my old non HDCP panel with a Pioneer KURO KRP-500M.

The picture with Blu-Ray and DVD's is excellent. With the built in DVB S/T module there seems to be an issue with the picture size. I have set the automatic panel detection off. The panel is 1080p and the resolution in the BS3 is selected accordingly. It seems that I miss some information from the TV broadcasts even after setting the command Format + 3. I have the sw version 5.02a. I have gone through all the menu's including the service one but have not found anything related.

Another question is the font size, how can I set the font size smaller for subtitles? This issue is also related to the DVB S/T module and only to the DVB-subtitling, not with the one broadcasted with fixed subtitles.