General Forum

Re: Help: How to connect Beocenter 9500 to Beocenter 6?

joeyboygolf — Mon, 05 Jan 2009 15:43:02 GMT

The AUX is input and output.

This is a pretty standard config. The same connection system works with, say, the AUX on a BC2300 and Masterlink socket on the Avant. Works fine if you can't afford dedicated active speakers.

Re: Help: How to connect Beocenter 9500 to Beocenter 6?

beodim — Mon, 05 Jan 2009 15:24:51 GMT

Many thanks for the quick feedback! So, does the AUX socket of BC 9500 work both as input and output (I thought it was the sound input only)?

Re: Help: How to connect Beocenter 9500 to Beocenter 6?

Craig — Mon, 05 Jan 2009 15:05:48 GMT

You will need a Beolink converter, to go between the two. Had the same setup with my old Beocenter 9000 connected to my BV3-32. You connect a Datalink cable from the Aux of the 9500 to the converter and a Masterlink cable from the converter to the Beocenter 6.

Craig

Re: Help: How to connect Beocenter 9500 to Beocenter 6?

joeyboygolf — Mon, 05 Jan 2009 15:03:42 GMT

I suggest that you need a Beolink converter. You can then use this to connect the Masterlink socket on the Beocenter 6 with the AUX socket on the 9500.

Help: How to connect Beocenter 9500 to Beocenter 6?

beodim — Mon, 05 Jan 2009 14:35:17 GMT

Hi everyone,

I have an opportunity to buy a Beocenter 9500 and would like to connect it to my Beocenter 6-26 as a temporary solution until I get the dedicated speakers. How can I connect the BC 9500 so that I can hear the CD/tape output from BC 9500 through the speakers of BC 6-26? Looking at the connections scheme in the BC 9500 manual I can't really see any audio output socket.

Thanks in advance for advice!