General Forum

Re: Turning on link room

Peter — Sat, 06 Dec 2008 11:57:55 GMT

Interesting. The Beo5 does reset options but I have not come across this. Maybe Keith can advise.

Re: Turning on link room

Santiago — Sat, 06 Dec 2008 11:43:52 GMT

Peter :
No idea!
Try resetting the options!

Done, but nothing changed

I've unplugged for several minutes all the system from mains and from ML.... then re-plugged, but no changes.

I've reset the 3 system options: main room VideoOpt=2 and AudioOpt=0, link room LinkOpt=6... again no changes.

Trouble: the wake-up caused by a very very slight contact with the beo5 sensitive wheel on the bed

Re: Turning on link room

Peter — Sat, 06 Dec 2008 11:30:53 GMT

No idea!

Try resetting the options!

Re: Turning on link room

Santiago — Sat, 06 Dec 2008 09:16:16 GMT

Peter :
Doesn't do it on my set up - either with the radio on or off in the main room. Just tried it!

Thank you Peter ! Did you tested a Beolink Active in L.Option 6 ?

I've also verified that all the beo4 "arrows keys block" are turning on the link room too, but this time with the last A/V source used

Any clue about what's going wrong in my setup ?

Re: Turning on link speakers

Peter — Sat, 06 Dec 2008 09:12:22 GMT

Doesn't do it on my set up - either with the radio on or off in the main room. Just tried it!

Turning on link room

Santiago — Sat, 06 Dec 2008 09:07:06 GMT

Hello everybody,

In my link room I have a pair of labs plugged into a Beolink Active with Link Option 6 ;

now the 3 Beo4 "volume keys" (+,MUTE,-) are always turning on my link speakers from stand-by with the RADIO source, even if the main room is in "all stand-by"

Is it a normal behaviour ?? or something is going wrong...

Thank you very much.