General Forum

Re: Beolab 4500's Display isues

ZeTof — Wed, 23 May 2007 13:36:52 GMT

... and you have to reset BS3000 and Blab4500 to be sure it works. (unplug power cable of both unit until stby led disapear, and re-plug them).

(sorry for my english...)

Re: Beolab 4500's Display isues

joeyboygolf — Wed, 23 May 2007 11:28:02 GMT

And the switch on the side of the speaker needs to be in the Audio position. You need to use fully wired Mk2 powerlink cables.

Re: Beolab 4500's Display isues

Keith Saunders — Wed, 23 May 2007 11:11:08 GMT

I assume you have the Beolab 4500's connected using the powerlink sockets and the switch is either in L or R

I am assuming the switch is not in the "A" position ?

In standby there should be a small red led next to the display

Beolab 4500's Display isues

Behave02 — Wed, 23 May 2007 10:37:45 GMT

I have a pair of BL:4500's connected up to my BS3000 . The issue that i have is that at present and for as long as i have had them, i can't seem to be able to see the led display info that is at the bottom right hand corner .Is this a conectivity issue or am i missing something here?

Thanks