General Forum

Re: Bang Olufsen Red line 60 (RL)

Puncher — Fri, 31 Oct 2008 09:08:23 GMT

Hassan:

Hi steve do you know the tuned part kit
part number?

Thanks

Hi Hassan,

as you have similar questions spread across 3 sperarte threads it's difficult to keep up - the answer you want is in one of the other threads but I've copied it here -

..............the B&O part number for the replacements is 8480128. They were certainly available from the dealer on the 4th Jan 2007, when these were purchased (at a cost of £58.24). They are for RL60 type 6503 and convert from ABR to a tuned port bass system.

Re: Bang Olufsen Red line 60 (RL)

Hassan — Fri, 31 Oct 2008 06:26:42 GMT

Hi steve do you know the tuned part kit

part number?

Thanks

Re: Bang Olufsen Red line 60 (RL)

Steve at Sounds Heavenly — Thu, 30 Oct 2008 10:00:11 GMT

Hi Hassan,

You have several options:-

1) Do nothing (VERY bad idea, as your speakers will sound terrible and are likely to suffer damage due to lack of air resistance in the cabinet).

2) Ask an expert such as Dillen to re-foam the ABR panels (assuming that you still have the metal panels)

3) Ask your local B&O dealer for a Tuned Port kit (see the end of the following thread for details) at a cost of around £60 per pair. This makes the RL60 sound AWESOME, a BIG improvement and well worth the money!

http://forum.beoworld.org/forums/thread/42542.aspx

4) (Last resort) patch up the ABR holes with thick wooden panels cut to size so that no air escapes. This will mean you lose a little bass response, but will save you damaging your speakers.

I went for option 3 (Tuned Port conversion) and did a capacitor upgrade at the same time. As you will see from the linked thread above, I am very pleased with the result!

Best regards,

Steve.

Re: Bang Olufsen Red line 60 (RL)

Hassan — Thu, 30 Oct 2008 09:32:18 GMT

Thanks Puncher

Re: Bang Olufsen Red line 60 (RL)

Puncher — Thu, 30 Oct 2008 09:15:49 GMT

I bought them at the Durham store which has since closed unfortunately.

Re: Bang Olufsen Red line 60 (RL)

Hassan — Thu, 30 Oct 2008 09:06:19 GMT

Do you still know the B&O dealer??

Thanks

Re: Bang Olufsen Red line 60 (RL)

Puncher — Thu, 30 Oct 2008 08:53:15 GMT

beoman247:

Thanks every much every one but is the "tuned port" going to be expensive??

Thanks

The tuned port kit from B&O dealer was ~£60 two years ago.

Re: Bang Olufsen Red line 60 (RL)

Hassan — Thu, 30 Oct 2008 08:51:06 GMT

Thanks every much every one but is the "tuned port" going to be expensive??

Thanks

Re: Bang Olufsen Red line 60 (RL)

Hassan — Thu, 30 Oct 2008 08:49:34 GMT

Thanks very much Puncher

Re: Bang Olufsen Red line 60 (RL)

burantek — Wed, 29 Oct 2008 18:52:45 GMT

here you go gents... sorry for bad link jandyt...

LINK

EDIT by moderator:- I've sorted the link for you (Chris - Medogsfat).

Re: Bang Olufsen Red line 60 (RL)

Puncher — Wed, 29 Oct 2008 18:40:31 GMT

Hi there Beoman247,

Given a few minutes I could point you to a myriad of threads on the subject of refurbishing RL60s. On the other hand if you search in the General and Vintage forums you can find the threads yourself by searching for RL60 and ABR's.

Distilling all advice you can replace the failed ABR with a replacement "tuned port" kit from B&O (search and you can find the B&O spare part number) or you can forward the frame and centre weight to some one like our member DILLEN, based in Denmark, to have your ABR's repaired),

hope this helps

Puuncher.

Re: Bang Olufsen Red line 60 (RL)

Jandyt — Wed, 29 Oct 2008 18:18:27 GMT

I'll go and get my mate Puncher, he's done it.
2 mins

Re: Bang Olufsen Red line 60 (RL)

Jandyt — Wed, 29 Oct 2008 18:13:34 GMT

Hi there Beoman, and welcome to Beoworld
It has been done by some of our members, but I believe it is a complex job.
I'll do a search and see what I can come up with.
Don't go away.

Andy T.

Bang Olufsen Red line 60 (RL)

Hassan — Wed, 29 Oct 2008 18:07:13 GMT

Hi every one !!

i have recently purchased a pair of B&O redline 60 and i have opedned them up and i have seen the

foam inside has detieroated, and i dont know what to do and get the foam from??

i was wondering if anyone knew a place on the web or near manchester who does repairs for

these sorts of thing??

and if any one has done this thing themselves who can guise me through it

Thanks