General Forum

Re: Beovision 7 40" wall bracket

KingOfSnake — Wed, 22 Oct 2008 23:42:04 GMT

Be careful, here, I am unsure of what the poster has got exactly but remember, wall bracket mountings are from the 7-32 (i.e. single pole stand), the mountings from the 7-40 stands will not go onto the wall mount fixings! I would be very careful of what the seller is actually offering, of course if they are selling a wall bracket with a (seperate?) mounting for a 7-4 then the mounting can be swapped - SO LONG AS YOU HAVE THE MOUNTING WITH A SINGLE FIXING POINT i.e. 2 screws!!!!

Re: Beovision 7 40" wall bracket

Russ — Wed, 22 Oct 2008 18:36:35 GMT

Sorry Lars, I got crossed up.

Since you already have a 7-2, if you have the wall bracket for it, then you will be able to remove the 7-4 from the BV-7 wall bracket, and replace it with the 7-2 wall bracket.

Re: Beovision 7 40" wall bracket

LarsJensen — Wed, 22 Oct 2008 18:19:24 GMT

Thanks. No haven't got it yet, but looking to buy it.

/Lars

Re: Beovision 7 40" wall bracket

Russ — Wed, 22 Oct 2008 17:35:26 GMT

Assuming that you already have the wall bracket for the 7.4, the answer is 'Yes!' You'll need a few minutes with a hex-key, but you should be OK. Barring that, your local B&O shop would be able to order the appropriate bracket for you.

Beovision 7 40" wall bracket

LarsJensen — Wed, 22 Oct 2008 16:40:34 GMT

Does anybody know if it is the same (B&O) wall bracket used for the BV 7 40" regardles of speaker type? Seen af wall bracket for sale that says 'For BV7 40" (and BL 7.4)' but I have the BL 7.2. Can I use this bracket with the BL 7.2?

/Lars