General Forum

Re: New manuals on site

tournedos — Mon, 29 Sep 2008 06:58:14 GMT

wtlc2zpx:
Did you all pick the last in the list?

Yes. I now tried on the Vista machine at work, and there the archive works.

I'm pretty sure the zip archive has been created with some option that makes it incompatible with older zip software, or it has an error that some unzippers are able to ignore. It won't unzip on Linux either.

Re: New manuals on site

Jandyt — Sun, 28 Sep 2008 16:59:44 GMT

PCG works fine on my antiquated system too. Better still, I didn't have to mess about, changing the file name this time.
Thanks for all your work Peter, you're a star.

Andy T.

Re: New manuals on site

darioazul — Sun, 28 Sep 2008 16:44:13 GMT

Dear Peter:

Thanks for all of your work to make this site one of the best on the net.

Dario

Re: New manuals on site

joeyboygolf — Sun, 28 Sep 2008 15:15:37 GMT

Peter :
tournedos:

Peter :
Could someone with a Windows computer check that the new PCG software is working - someone has reported it is corrupted but I cannot check as I am on a Mac!!
Edit: I see you meant the Product Configuration Guide Unfortunately no, I can't open it with WinZip 8.1. Perhaps the archive uses a feature that is not supported by all zip software?
Odd. I can unzip it even on my Mac - it just doesn't work on OSX!

Works fine on my somewhat antiquated machine but I have to choose the Windows 2000 version despite running XP Pro SP3

Re: New manuals on site

PhilLondon — Sun, 28 Sep 2008 14:27:29 GMT

Did you all pick the last in the list?

Re: New manuals on site

Peter — Sun, 28 Sep 2008 14:20:35 GMT

tournedos:
Peter :
Could someone with a Windows computer check that the new PCG software is working - someone has reported it is corrupted but I cannot check as I am on a Mac!!
Edit: I see you meant the Product Configuration Guide Unfortunately no, I can't open it with WinZip 8.1. Perhaps the archive uses a feature that is not supported by all zip software?

Odd. I can unzip it even on my Mac - it just doesn't work on OSX!

Re: New manuals on site

Peter — Sun, 28 Sep 2008 14:18:41 GMT

Thanks for that.

Re: New manuals on site

PhilLondon — Sun, 28 Sep 2008 12:35:06 GMT

Yes it has worked for me...

The zip file opens fine and I could install and run the new software.

The DVB-T and DVB-S module for the BV7-32 has been added I have noticed, compared to the version I had before.

I was hoping to find the Beomaster 5 / Beosound 5 in it, but no luck ;-)

Re: New manuals on site

tournedos — Sun, 28 Sep 2008 12:30:32 GMT

Peter :
Could someone with a Windows computer check that the new PCG software is working - someone has reported it is corrupted but I cannot check as I am on a Mac!!

Edit: I see you meant the Product Configuration Guide Unfortunately no, I can't open it with WinZip 8.1. Perhaps the archive uses a feature that is not supported by all zip software?

Re: New manuals on site

Peter — Sun, 28 Sep 2008 12:08:27 GMT

Could someone with a Windows computer check that the new PCG software is working - someone has reported it is corrupted but I cannot check as I am on a Mac!!

Re: New manuals on site

tournedos — Sun, 28 Sep 2008 11:11:29 GMT

Peter :
Beomaster 1000 T2316/2317 - we did have a Mauritron version but it missed out all the good bits! I have scanned a full version in .

Thank you! Now I can finally fine tune mine.

As a side note, the FM stereo decoder (I never knew BM1000 was available without one?) board looks at a quick glance to be identical to the one that was used in BM900. Lots of the 900s around don't have one, so this might be useful information to someone...

Re: New manuals on site

Craig — Sun, 28 Sep 2008 09:35:49 GMT

Looks like Peter has been busy again then. Are there any other manuals we don't have?

Craig

Re: New manuals on site

9 LEE — Sun, 28 Sep 2008 06:30:59 GMT

That's only a fraction of what Peter has done - honestly, he works so hard with the manuals it's untrue!

Thanks again, from all of us.

Lee

Re: New manuals on site

Friedmett — Sun, 28 Sep 2008 06:22:41 GMT

That Beomaster 8000 brochure is awesome. Thank you Peter. As it turned out my system has the same units and it works/looks brilliant together.

I can also agree on the Beosystem 6000. Well done!

New manuals on site

Peter — Sun, 28 Sep 2008 05:17:05 GMT

Some of you may be aware that we have changed server for our main product site and since then have had a few issues uploading new manuals. Thanks to the actions of Keith, who is a technical wizard without whom I do not what we would do, we have bypassed this problem and hopefully will have a long term solution soon.

In the meantime I have sanned the following and we have put them on site:

Beosystem 8000 sales brochure - I have been meaning to do this for a while but could not do it it when I got it as I only had an A4 scanner then and misplaced it when I got my A3 device! It refers to the late version with the BG8002 and Beocord 9000 - I think it is made with the US market in mind!

Beomaster 1000 T2316/2317 - we did have a Mauritron version but it missed out all the good bits! I have scanned a full version in .

Beosound Ouverture - the first part of the service manual was corrupt so I have replaced it and I have put on the add on for the new laser mechanism - this will also do for similar models like the 2500.

Beovision MX4002 - the service manual is now on and covers the MX4000 6000 and 7000 as well - I think we have a version of this already but this one appears to be better.

Beocord VX5000 - we have the service manual on and this also covers the 5500 and 4500. Many thanks to the member flambart who sent me this.

The Beogram CD50 service manual now has page 1-10 in it - the page for the remote control.

I have also put on the September 2008 version of the Product Configuration Guide.

Many thanks again to Keith for making this possible. Remember you need to be a Gold or Silver member to access these.

I am going to put some more catalogues on next - also looking for things we don't have on - please contact me if you can help or if you have a request.