General Forum

Re: BeoLab 4000 - connection

Steve at Sounds Heavenly — Thu, 18 Sep 2008 10:12:12 GMT

Thanks Gorissek,

I'm glad that my cables are being seen on BeoWorld! I currently have a number of dealers in the UK who keep these in stock (including LifeStyle AV where your picture came from) and I'm hoping to offer these to franchises across Europe during the coming months. These iPod cables are intended to be true "hifi" cables for B&O, instead of the usual "bits of wire" of varying quality that are often on offer......

Best regards,

Steve.

Re: BeoLab 4000 - connection

gorissek — Sun, 14 Sep 2008 05:25:29 GMT

Would you like me to translate it for you : )

Re: BeoLab 4000 - connection

Dave — Sun, 14 Sep 2008 00:06:29 GMT

gorissek:
Predvsem s designom - industrijski in graficni. Me pa zanima tudi to, s cimer se ukvarjas ti - zanimivi projekti : )
Mislim, da je pametno da ne smetiva vec tukaj gor, lahko pa preko PM.

Oh i agree

Re: BeoLab 4000 - connection

gorissek — Sat, 13 Sep 2008 16:35:53 GMT

Predvsem s designom - industrijski in graficni. Me pa zanima tudi to, s cimer se ukvarjas ti - zanimivi projekti : )

Mislim, da je pametno da ne smetiva vec tukaj gor, lahko pa preko PM.

Re: BeoLab 4000 - connection

nmartin771 — Sat, 13 Sep 2008 16:22:22 GMT

I ja sam se obradovao :)

Impresivno... kod mene je situacija ovakva Beosystem 2300, Beocenter 1, Beocom 2500.

Napadam sad beolab 4000 i beocom 2 :)

Vidim da imas sajt, cime se bavis ?

Ovo je moj sajt

www.nmartinproject.com

Re: BeoLab 4000 - connection

nmartin771 — Sat, 13 Sep 2008 16:17:20 GMT

Great !

That is what I wanted to hear :) simple and easy :)

Thanks Peter!

Re: BeoLab 4000 - connection

gorissek — Sat, 13 Sep 2008 16:16:48 GMT

And this is how the cable looks like. Ask your dealer, he should have them.

PS. Zivjo, lepo videti se nekoga iz blizine. Kaj imam pa lahko vidis v profilu.

Re: BeoLab 4000 - connection

Peter — Sat, 13 Sep 2008 16:11:14 GMT

In that case, just run a cable from the audio out to the Aux in of the 2300.

Re: BeoLab 4000 - connection

nmartin771 — Sat, 13 Sep 2008 16:03:10 GMT

I dont want to control my pc via BS2300, I simply want to play music from my PC, MAC to my beolab4000 nothing else, plug 3,5 mm jack to my comp. and play music.

maby I confused....

Re: BeoLab 4000 - connection

Peter — Sat, 13 Sep 2008 15:58:43 GMT

The PC connects to the Aux socket and you control the PC via the 2300 - I think I may have confused you! The cable shown is a bespoke one made by one of our Beoworld members, Ridax. I believe you can order one via his site.

Re: BeoLab 4000 - connection

nmartin771 — Sat, 13 Sep 2008 15:53:48 GMT

Seams logical to me...

gorissek, vidim da si iz Slovenije, ja sam iz Srbije - Novi Sad :)

Kakav sistem imas? Ja sam veliki fan B&O...

Re: BeoLab 4000 - connection

gorissek — Sat, 13 Sep 2008 15:44:49 GMT

I'm not 100% sure, but isn't there another way? I'll be in a similar position in the near future and I was planing on connecting the speakers to the BeoSound and then connecting the computer to the AUX of the BeoSound via the 3.5mm jack - DIN plug cable. Correct me, if I'm wrong.

Re: BeoLab 4000 - connection

nmartin771 — Sat, 13 Sep 2008 15:28:54 GMT

Great!

I didnt know that.... than I have one more left powerlink on my 2300 so that I can conect pc to it...

And where I can buy this little cable? or I simly go to the shop that making cables and tell them ?

sorry about my English.

Re: BeoLab 4000 - connection

Peter — Sat, 13 Sep 2008 15:20:18 GMT

The product connects the BC2300 to your computer.

Daisy chaining uses the fact that each Powerlink cable carries both right and left signals which are selected by a switch on the Beolab 4000. There are two Powerlink sockets on the speaker - you attach one cable from the 2300 to the speaker and then connect another cable to the speaker and run it to the second speaker. You can actually connect up to ten pairs this way if you want!

Re: BeoLab 4000 - connection

nmartin771 — Sat, 13 Sep 2008 15:13:11 GMT

Hello Peter,

Thanks for quick replay....

I'm not shure that I understand what its mean "daisy chaining them."

Can you explain me how I can do that?

And I saw this product that you show me, this I need to connect to my beosystem 2300 ?