https://archivedforum.beoworld.org:443/forums/13.aspxThe main Meeting Place for BeoWorld members, and the place for General Questions, Answers and things to say! If you have any questions about anything Bang &amp; Olufsen related - please ask. If you have anything to say - please tell!enCommunityServer 2008 SP2 (Build: 31104.93)https://archivedforum.beoworld.org:443/forums/thread/141759.aspxMon, 15 Sep 2008 04:25:57 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:141759eoulianov0https://archivedforum.beoworld.org:443/forums/thread/141759.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=141759<p>Thanks a lot! I&#39;ll replace wires. </p><p>There are another speakers and tv was planned initially, so that thin powerlink was enough for&nbsp;initial installation.&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/141362.aspxFri, 12 Sep 2008 12:39:26 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:141362TripEnglish0https://archivedforum.beoworld.org:443/forums/thread/141362.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=141362<p>The warning is true. The speakers literally will not play. You will need to replace the cable.</p><p>(How do you suddenly install cable?)&nbsp;</p><div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/141346.aspxFri, 12 Sep 2008 11:12:41 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:141346joeyboygolf0https://archivedforum.beoworld.org:443/forums/thread/141346.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=141346I think not. You must use fully wired powerlink.<div style="clear:both;"></div>https://archivedforum.beoworld.org:443/forums/thread/141279.aspxFri, 12 Sep 2008 06:35:36 GMT41a2a90c-3a1e-4bd3-b144-3883695a7f38:141279eoulianov0https://archivedforum.beoworld.org:443/forums/thread/141279.aspxhttps://archivedforum.beoworld.org:443/forums/commentrss.aspx?SectionID=13&PostID=141279<p>BeoVision 9 + 4x BeoLab 5, and suddenly installed thin Power Link cable (only left/right channel audio and speaker relay - brown coax, green coax and yellow, without white coax, grey and pink) to each speaker.</p><p>There is a terrible warning at user manual - <font color="#292526" face="Arial" size="1"><font color="#292526" face="Arial" size="1"><font color="#292526" face="Arial" size="1">IMPORTANT: Use fully mounted Power Link cables only &ndash; not the very thin type! If the wrong type of Power Link cables are used, the loudspeaker will not play. If in doubt, ask your Bang &amp; Olufsen retailer.</font></font></font></p><p align="left">Is there a acceptable solution without replacing cable?</p><p align="left">Thanks!</p><div style="clear:both;"></div>