General Forum

Re: AV 7000 interface with Beosound 9000

Peter — Thu, 17 May 2007 11:22:17 GMT

That sounds like the right one. $300 is the new price though!

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Thu, 17 May 2007 10:16:51 GMT

Hi Peter,

The converter I found and I "think" is correct is the: Bang & Olufsen 1161266

Is this correct??? Thanks a ton for all your help Peter..

Keith

Re: AV 7000 interface with Beosound 9000

Peter — Thu, 17 May 2007 00:58:34 GMT

Make sure it is the correct converter!

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Wed, 16 May 2007 19:54:52 GMT

We'll know soon, picked up a AV7000 for $325 on ebay a few days ago supposed to be in "like new" condition...just found a converter new (OLD) in box from a previous dealer but it's $300 uggggg....getting all the cables togther...i need a long masterlink and some real long powerlinks......anyone???? thanks to all for the help so far..

Re: AV 7000 interface with Beosound 9000

Peter — Wed, 16 May 2007 16:51:12 GMT

jk1002:
There is one right now on Ebay.com . It is quite expensive though with 600$. Normally you can pick them up way cheaper.
Be warned, an US dealer made a funny coment about it on the old beoworld so it might be better to skip it and try getting a used beosystem.

I take it you mean an AV7000 for $600! The Beolink converters go for about £30!

I certainly would not recommend an AV7000 for anyone outside the US. But they do fill a need there.

Re: AV 7000 interface with Beosound 9000

jk1002 — Wed, 16 May 2007 16:44:54 GMT

There is one right now on Ebay.com . It is quite expensive though with 600$. Normally you can pick them up way cheaper.

Be warned, an US dealer made a funny coment about it on the old beoworld so it might be better to skip it and try getting a used beosystem.

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Wed, 16 May 2007 09:00:57 GMT

Thanks Peter. I'm trying to find a us model now.

Re: AV 7000 interface with Beosound 9000

Peter — Wed, 16 May 2007 00:44:15 GMT

Powerlink. The Beolink converter is about £120 but you should be able to get a cheaper one second hand. Unfortunately they are voltage specific so a UK one will be of little use.

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Tue, 15 May 2007 22:42:48 GMT

Important question on the AV 7000: Are the active speaker outs in Powerlink or Speakerlink???? Thanks.

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Tue, 15 May 2007 21:22:03 GMT

Thanks beotex,

Any idea where i could pick up the beolink converter that i need to interface these 2??? and how much it is?? thanks for the help and welcome..

Re: AV 7000 interface with Beosound 9000

beotex — Tue, 15 May 2007 21:14:49 GMT

mecca:
The ability of the AV 7000 is my biggest question. ie. does it have an amp for the center speaker? can i loop the center speaker outs (if preamp) back to my tv and use that speaker.?? can i make the 4 BO speakers work as surround when i like, THEN change it to just 4 speaker stereo?? Sorry for all the questions...i really need some help here !!! THANKS AGAIN ...

Welcome to the forum. Yes, the AV7000 has an amp for the center speaker, but I don't know if you can loop it back to your TV. You should be able to choose Speaker 4 or Speaker 5, which will allow 4 speaker stereo or surround sound. I had one hooked up to a Beosound 9000, and I believe I had to use a BoLink Converter (1411) to connect the two. Hope that helps.

Re: AV 7000 interface with Beosound 9000

Peter — Tue, 15 May 2007 14:54:34 GMT

The straight answer is yes. I would suggest using fully wired Powerlink cables as these will suit all speakers!

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Tue, 15 May 2007 14:50:29 GMT

Peter,

Can I run Powerlink cables to the penta 1's and then convert at the speaker to the Speaker link?? We're putting wires in the walls so if i go with Powerlink in the walls I can change speakers in the future if necessary...thanks,keith

Re: AV 7000 interface with Beosound 9000

Peter — Tue, 15 May 2007 14:29:20 GMT

The AV7000 was a US only model and hence the European members will have little experience of it. I think there is an amplifier for the centre speaker built in and the other speakers use Powerlink. Mark 1 Pentas will need the special cables.

Re: AV 7000 interface with Beosound 9000

Frank Rizzo — Tue, 15 May 2007 14:16:23 GMT

Is there a thread talking about the AV 7000???? thanks.