General Forum

Re: mounting system for the beosystem 4500

kallasr — Tue, 02 Sep 2008 07:51:43 GMT

just be sure the panels are attached firmly - as stated above, they tend to get loose over time.

Re: mounting system for the beosystem 4500

nealhf — Tue, 02 Sep 2008 07:16:00 GMT

thats great thanks again! im gonna give it a try

Re: mounting system for the beosystem 4500

kallasr — Tue, 02 Sep 2008 01:36:57 GMT

Yes, just one board (for BM, BG CD, BC).

Ralf

Re: mounting system for the beosystem 4500

nealhf — Mon, 01 Sep 2008 19:57:21 GMT

hi there did you mount your system to the boards in the picture? ive decided i just like it sitting on top of a small entertainment system i do have the riser feet for the back of all the units so it still looks nice! but can you just mount on the boards?

Re: mounting system for the beosystem 4500

kallasr — Sat, 30 Aug 2008 13:06:04 GMT

.....

(all the ... just to trick the upload system...)

Re: mounting system for the beosystem 4500

kallasr — Sat, 30 Aug 2008 13:05:10 GMT

....

Re: mounting system for the beosystem 4500

kallasr — Sat, 30 Aug 2008 13:03:56 GMT

...

Re: mounting system for the beosystem 4500

kallasr — Sat, 30 Aug 2008 13:02:26 GMT

Or you just mount it to a wooden 'plate' as the following picture suggest (and it did work, too)!

Re: mounting system for the beosystem 4500

nealhf — Fri, 29 Aug 2008 23:16:19 GMT

thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Re: mounting system for the beosystem 4500

Mohawk — Fri, 29 Aug 2008 10:23:16 GMT

If you wall mount your system take it as a good routine to check the glasspanels now and then. It has happened that the glue gets weak with time and the panel can fall off in worst case. Normally it's no problem - but it's good to know.

/Fredrik

Re: mounting system for the beosystem 4500

Ignace — Fri, 29 Aug 2008 08:19:18 GMT

The unit "hangs" on the 2 small hooks of the bracket.

Re: mounting system for the beosystem 4500

nealhf — Fri, 29 Aug 2008 07:08:29 GMT

hey thanks for the reply! and the speed! so the bracket that attaches to the back of the unit doesnt really attach to the unit ? is that right? it just sets inth openings?

thanks again!

Re: mounting system for the beosystem 4500

Ignace — Fri, 29 Aug 2008 05:18:21 GMT

The image shows a wall bracket for components of Beosystem 4500 (and 3500)

Beogram CD 4500(3500) and Beocord 4500 (3500) are mounted with the bracket attached to the wall as shown above.

With Beomaster 4500 (3500), the vertical parts are placed on the sides (the other openings in the bracket)

Re: mounting system for the beosystem 4500

Ignace — Fri, 29 Aug 2008 05:02:54 GMT

Actually, the bracket for the Beomaster is the same as for Beocord and Beogram CD, only they are attached different.

Re: mounting system for the beosystem 4500

mobeyone — Fri, 29 Aug 2008 04:11:34 GMT

Hi,

The brackets are fixed to the wall and the units simply attach onto the hooks on the wallbracket. The beomaster has a longer bracket than the cd/beocord. Measure the wall up and the brackets before you start drilling! They are a but fiddly to get right but check and check again.

With regards to the cable covers, these have been on ebay recently, and for a decent price but are hard to get hold of.