General Forum

Re: Option programing MCL with BV8

Peter — Tue, 12 Aug 2008 13:35:05 GMT

I think I might remember the problem! Try setting the speakers to option 2.5.

So :

Standby, Link, 2, Store, link, 5, store.

If that doesn't work, try 2.6 - same as above but use 6 instead of 5.

Re: Option programing MCL with BV8

expoman — Tue, 12 Aug 2008 12:57:07 GMT

The TV works with sound. If we set TV to option 1 and Link to option 1 we get only TV sound at TV and audio sound at link. In option TV 2 and link option 2 we get TV sound at TV and Audio sound at the TV and also Audio sound at the link but no TV sound?

Re: Option programing MCL with BV8

Peter — Tue, 12 Aug 2008 10:53:49 GMT

I would be tempted to set the speakers to Option 4 so that you will press LINK+ command to activate them.

Re: Option programing MCL with BV8

Peter — Tue, 12 Aug 2008 10:51:38 GMT

Is the TV working? With sound from the TV?

Option programing MCL with BV8

expoman — Tue, 12 Aug 2008 10:42:12 GMT

I have an MCL system with 2A's and 1 2AV the main music system is a Beosystem 7000. I have added a Beosystem 3 and B&O plasma in the main room with a beolink converter from the 7000 system to the BS3. This works great but now I have added a Beovision 8 in the master bedroom to replace a MX5500. The bedroom has in-wall speakers connected to a 2P amp with a link eye in the room. The MX was connected to the 2AV with an aux cable and I could listen to TV sound either just through the MX or by selecting TV/AV/TV on my beolink 1000 I would get TV sound on the in-wall speakers as well. My dealer added the Masterlink module to the BV8 and used another Beolink converter to go from master link to aux to the 2AV. He can not figure out what link options to use to get the TV sound through the in-wall speakers. We tried Vopt 2 for TV and link opt 2 for the link but no sound. Link turns on with TV but no sound? Any ideas would be appreciated.