General Forum

Re: Serene - DECT communication

s0235400 — Fri, 15 Aug 2008 11:35:50 GMT

Hi Quim,

Thank you for the photo.

Obviously I've got wrong device from my local dealer.

Will try to tell it him tomorrow.

Regards,
Sasha

Re: Serene - DECT communication

Quim43 — Fri, 15 Aug 2008 10:24:38 GMT

This is my Serene Docking Station:

Regards

Re: Serene - DECT communication

s0235400 — Fri, 15 Aug 2008 06:39:00 GMT

Hi All,

I've got my Serene (bought from Samsung) successfully updated to the latest SW by my local B&O dealer.

Now I have the same test results as Quim:

*#1234# E910XXFI1

*#1111# F:REV 1.0C

But still my Serene doesn't have an option to register to Docking station.

Neither my local dealer's personal Serene has. (Although his Serene can register to Docking station at his home.)

So now the question is:

How to figure out whether the device I've got from B&O dealer is a Docking station or just Desktop charger?

There is no serial or part number on it, but in my receipt there is Part No. 8080013.

Thanks to everyone for any suggestions.

Best regards,
Sasha

Re: Serene - DECT communication

Quim43 — Fri, 25 Jul 2008 02:45:24 GMT

s0235400:
Hi Quim,
Could I ask you to specify: have you run the applicaion to update SW in Serene yourself?
Regards,
Sasha

No, my dealer did, but i was there looking the process.

Regards

Re: Serene - DECT communication

s0235400 — Thu, 24 Jul 2008 11:59:48 GMT

Hi Quim,

Yes, I undestand that there are 2 different things: synchronize with Beocom and Outlook.

Could I ask you to specify: have you run the applicaion to update SW in Serene yourself?

Regards,
Sasha

Re: Serene - DECT communication

Quim43 — Thu, 24 Jul 2008 09:48:29 GMT

These are two diferent things: synchronize with Beocom 6000 and synchronize with Outlook.

When I bought my Serene, it came with the SW E910XXFC1, and I did synchronize it with my Beocom 6000, but no with my PC. I updated it to the new SW and as I remember, the aplication used to update the SW, deleted everything I had in the Serene (photos, numbers, etc.), and the old SW, of course.

I think your Serene can be updated to the last SW, I don't think it's driver's reason or another technical reason to can't do it.

Good luck

Re: Serene - DECT communication

s0235400 — Thu, 24 Jul 2008 09:06:03 GMT

OK,

Thanks to Quim and Andy we gain some statistics now.

Also the main B&O site provides some information about SW version:
http://www.bang-olufsen.com/page.asp?id=378&prodid=562
"You cannot synchronise contacts with Outlook if you have an old software version (software version FC1 or FA1).
Only Serene with software version FI1 (or later) can synchronise contacts with Microsoft Outlook.
Please contact your Bang & Olufsen retailer to get your Serene updated."

According to that info we could see that Andy's Serene can't synchronise contacts when Quim's Serene can.

But the most important bit is the fact that firmware version for all 3 Serenes is the same.

Thus some questions arise again:
- why they told me that SW in Serene from Sumsung can't be updated by B&O?
- are there any technical reasons (drivers, etc.) or it is just a policy?
- has anyone actually tried and failed or it is just a theoretical knowledge?

Any suggestions would be much appreciated.
That Serene is my present to my wife and I'm just desperate that I can't do what she asked: to synchronize Serene and Beocom 6000.

Best regards,
Sasha

Re: Serene - DECT communication

Quim43 — Thu, 24 Jul 2008 00:00:40 GMT

Mine is

*#1234# E910XXFI1

*#1111# F:REV 1.0C

Regards

Re: Serene - DECT communication

Jandyt — Wed, 23 Jul 2008 16:36:09 GMT

Mine is

*#1234# E910XXFA2

*#1111# F:REV 1.0C

Andy T.

Re: Serene - DECT communication

s0235400 — Wed, 23 Jul 2008 16:15:48 GMT

Thank you Quim,

My Serene returns:

*#1234# - E910XXEL3

*#1111# - F-REV1.0C

What about your Serene?

Regards,
Sasha

Re: Serene - DECT communication

Quim43 — Wed, 23 Jul 2008 05:29:02 GMT

To see the software, press *#1234#

To see the firmware, press *#1111#

Maybe is on contrary, i am not sure.

Re: Serene - DECT communication

s0235400 — Wed, 23 Jul 2008 05:08:54 GMT

I've asked my local B&O dealer about SW update for my Serene (bought from Samsung) and he told me that it is not upgradeable by B&O at all.

Is it correct? If yes - Is it due to a technical reasons (connectors, protocols, drivers incompatibility)?
Or is it just a administrative barrier to separate responsibility between 2 sell chains?

To be honest I don't believe that there are 2 different SW upgrade procedures for Serenes.
I'm a programmer for 28 years and I can't find a reason for developers to implement 2 different incompatible SW for the same product.

BTW, does anybody know how to check SW version on Serene?

Best regards,
Sasha

Re: Serene - DECT communication

s0235400 — Sun, 20 Jul 2008 07:42:42 GMT

OK guys, thank a lot for an advise.

I'll ask my local dealer for Serene software update and keep you informed.

Regards,
Sasha

Re: Serene - DECT communication

jvdb107 — Sun, 20 Jul 2008 05:48:00 GMT

Yesterday I was working at my local B&O shop and our boss told me that if you buy a Serene from Samsung B&O does not condsider it to be a Serene at all.

Plus they will charge you (in Belgium) 25 euros

Re: Serene - DECT communication

Jandyt — Sun, 20 Jul 2008 03:30:43 GMT

In which case, I would follow Peter's recommendation and take both your Serene and your new docking station into your dealer for a SW update.
Please keep us informed.

Andy T.