General Forum

Re: n.music issue

scott451 — Thu, 31 Jul 2008 08:44:57 GMT

ok,

that worked. kind of like re-booting your computer. thanks again super beoworld !

scott

Re: n.music issue

Stan — Tue, 15 Jul 2008 23:13:58 GMT

Agree with Peter's instructions. I think what you're seeing is the PC2 has taken over as master, or partially so... I recall running into this. If it is difficult to unplug everything, at least unplug the PC2 and your master, then plug in the master and wait a few minutes BEFORE plugging in the PC2. Obviously, it would be better to power everything down, and, of course, make sure to power up your master first.

Stan

Re: n.music issue

Peter — Tue, 15 Jul 2008 07:48:12 GMT

Bizarre! The very first thing to do is a hard reset. Switch everything off at the mains and then reconnect. I would then, if the problem persists, look at your option setting - check the Beolink PC2 is in Option 6 - it may have defaulted to Option 2 when it was moved. Then report back!

n.music issue

scott451 — Tue, 15 Jul 2008 04:09:33 GMT

hi,

i have been experiencing a strange behavoir with n.music ever since i moved my computer. for n.music to function correctly i must launch it from the audio master unit (a beocenter 1). if i launch it from another unit, everything seems to work (remote unit turns on, n.music is displayed on bc1, ...) but no music comes through.

once n.music is launced on the audio master, i can launch it from a remote unit (beolink passive, bs3500, bc6). however, this has the effect of cutting off the sound on the audio master bc1. to re-stablish sound, i must change the bc1 to somehting else (like tv) and then back to n.music.

now this is weird and kind of a drag. any help from the forum would be greatly appreciated !

scott