General Forum

Re: schematics RCA to Powerlink

The Stig - ver. 1.7 — Thu, 08 May 2008 16:43:12 GMT

It's not the schematic to use....

You will need a mini jack and two "7" pin Din. Connect ground to pin 2 and 7, for the left speaker you connect the left sound signal to pin 3 and 5. and the same for right signal in the other plug. and then set the speaker to "line" and it will work.

Re: schematics RCA to Powerlink

Hagen2000 — Thu, 08 May 2008 08:57:31 GMT

I would try the Beolab 3 speakers using their line input. In this case you won´t need a trigger signal to make the speakers work and you will only need a simple 3.5mm stereo jack to cinch adapter!

Re: schematics RCA to Powerlink

11048437 — Wed, 07 May 2008 16:23:43 GMT

Puncher:

Does the BS2 have a phono connector?? Surely its a 3.5mm stereo jack??
Or do you mean a Beocentre 2??

Hi Puncher,

It's not about a beocenter 2, it's about a Beosound 2....

The ideea is that I bought a pair of Beolab 3 speakers on E-Bay from USA and the guy does not wanted to send them in Canada. I have found a solution: the guy will send the speakers in Plattsburgh, New York via UPS with the Hold For Pick Up option, and then I'll go there(88 km drive) to collect them. I would like to try them on place so that's why I'll need a way to verify them on place( in case I'll enter in Canada with them, then I have to pay 300$ Custom fees and if they «are not working, I'll have to send them back - difficult to have my 300$ back as I have to fill a lot of papers............It is a mess I know but the price of the BL3 was so good .....

Constantine

Re: schematics RCA to Powerlink

11048437 — Wed, 07 May 2008 16:16:54 GMT

11048437:
Bulgarien:

Try these two link , all kind off schematics should be there...
Peter Pans B&O adapter :
TRYK HER.
____________________________________________________________
Vil du kun se DIN stik, kabler / forbindelser, så se tegninger du kan lodde efter her.
B&O DIN Adapter Cabel Connection. = Kun DIN forum:.
TRYK HER.

You can use both 5 and 7 pin DIN plug, its make no difference, in this set-up

Thanks very much!!

Do you think that Beolab 3 will Power On the moment I'll send signal on R and L channel?

Constantine

hm.........there are so many schematics there...

I thinlk I'll need a voltage signal on the Trigger ........

Re: schematics RCA to Powerlink

11048437 — Wed, 07 May 2008 16:16:48 GMT

11048437:
Bulgarien:

Try these two link , all kind off schematics should be there...
Peter Pans B&O adapter :
TRYK HER.
____________________________________________________________
Vil du kun se DIN stik, kabler / forbindelser, så se tegninger du kan lodde efter her.
B&O DIN Adapter Cabel Connection. = Kun DIN forum:.
TRYK HER.

You can use both 5 and 7 pin DIN plug, its make no difference, in this set-up

Thanks very much!!

Do you think that Beolab 3 will Power On the moment I'll send signal on R and L channel?

Constantine

hm.........there are so many schematics there...

I thinlk I'll need a voltage signal on the Trigger ........

Re: schematics RCA to Powerlink

11048437 — Wed, 07 May 2008 16:16:48 GMT

11048437:
Bulgarien:

Try these two link , all kind off schematics should be there...
Peter Pans B&O adapter :
TRYK HER.
____________________________________________________________
Vil du kun se DIN stik, kabler / forbindelser, så se tegninger du kan lodde efter her.
B&O DIN Adapter Cabel Connection. = Kun DIN forum:.
TRYK HER.

You can use both 5 and 7 pin DIN plug, its make no difference, in this set-up

Thanks very much!!

Do you think that Beolab 3 will Power On the moment I'll send signal on R and L channel?

Constantine

hm.........there are so many schematics there...

I thinlk I'll need a voltage signal on the Trigger ........

Re: schematics RCA to Powerlink

11048437 — Wed, 07 May 2008 16:07:57 GMT

Bulgarien:

Try these two link , all kind off schematics should be there...
Peter Pans B&O adapter :
TRYK HER.
____________________________________________________________
Vil du kun se DIN stik, kabler / forbindelser, så se tegninger du kan lodde efter her.
B&O DIN Adapter Cabel Connection. = Kun DIN forum:.
TRYK HER.

You can use both 5 and 7 pin DIN plug, its make no difference, in this set-up

Thanks very much!!

Do you think that Beolab 3 will Power On the moment I'll send signal on R and L channel?

Constantine

Re: schematics RCA to Powerlink

Puncher — Wed, 07 May 2008 15:24:27 GMT

Does the BS2 have a phono connector?? Surely its a 3.5mm stereo jack??

Or do you mean a Beocentre 2??

Re: schematics RCA to Powerlink

Bulgarien — Wed, 07 May 2008 15:16:46 GMT

Try these two link , all kind off schematics should be there...

Peter Pans B&O adapter :

TRYK HER.

____________________________________________________________

Vil du kun se DIN stik, kabler / forbindelser, så se tegninger du kan lodde efter her.

B&O DIN Adapter Cabel Connection. = Kun DIN forum:.

TRYK HER.

You can use both 5 and 7 pin DIN plug, its make no difference, in this set-up

schematics RCA to Powerlink

11048437 — Wed, 07 May 2008 12:36:17 GMT

hi,

I would like to connect a Beosound 2 player directly to Beolab 3 speakers. Has anyone of you a schematics of this cable transformation?

Thanks in advance,

Constantin